DSM Humboldt Simplifier Bass Station Preamp

Stop sacrificing tone for convenient routing! The DSM Simplifier Bass Station includes a preamp, gain, level and 3-band EQ with multiple routing options.
The DSM & Humboldt SIMPLIFIER BASS STATION is everything you ever needed to go direct to the FOH or for recording amazing bass tones without sacrificing anything.

It includes a Bass Preamp with gain, level, and a 3-band EQ with semi-parametric mid control, parallel signal routing with a selectable LPF, dual FX loop (for preamp and parallel signal), and an amazing analog cabinet simulation, based on the acclaimed Omnicabsim by DSM Noisemaker.

Versatile Preamp Stage:

The preamp stage is based on the Ampeg SVT (TM). This amp stands out for its personality, versatility and articulation. Includes a flexible EQ with +- 15dB per band, and the switchable midrange from 400-900-1200Hz.

Across most of the gain settings, the amp is tight and clear. But with higher gains, it will grunt and growl like a real Ampeg SVT (TM) does.

A parallel Universe:

The SIMPLIFIER BASS STATION separates the signal at the input for a parallel line, bypassing the preamp, and including a switchable low pass filter (100Hz, Off, 500Hz). The effect of blending this clean signal with the preamp tone let's you overdrive the preamp while retaining a huge low end response and natural dynamics.


Welcome to the Bass Station and zZounds’ exclusive demo:


Cabinet Simulation:

The Cabinet simulation was carefully designed to get the most distinctive cabinet tones. A Closed Back 8x10, with its tight and punchy lows. A vented 1x15 for warm creamy mids and thick lows, and a vented 4x10 for more open, wider range response.

The read more Speaker color switch, Warm, Bright and Modern, simulates the different materials and geometry of bass speakers, which affects the dynamics and midrange response.
And with the Resonance and Mic position controls, you can adjust the exact amount of high end brightness and the cabinet low end resonance you want.

Dual effect loop:

The SIMPLIFIER BASS STATION is the first to include TWO effect loops, so you can use different effects on the main (preamp) and on the parallel signal chain. The sky is the limit here. Try a compressor for the parallel signal, and a chorus on the preamp; or a delay that only repeats the bottom end, or even a volume pedal to control the parallel blend in real time. Use your imagination to get bass tones never heard before!
read less
- Current Consumption: 50mA to 100mA (if Headphone out is used)
- Supply Voltage: 9V -12V
- Polarity: Center negative
- Input Impedance: 1 Meg Ohm
- TRS Output Impedance: 100 Ohm
- DI Output Impedance: 120 Ohm
- Send Output Impedance: 100 Ohm
- Return Input Impedance: 1 Meg ohm
- Headphone Power: 120mW @ 32 Ohm
- Width: 115 mm (4.53 in)
- Height: 65 mm (2.55 in)
- Depth: 55 mm (2.16 in)
- Weight: 430 g (0.94 lb)
Dimensions and Weight in Packaging
Base Item
Shipping Weight: 1.25 lbs
Shipping Dimensions: 7 x 5 x 3 in
Manufacturer Part Number (MPN): DSM SIMPLIFIERBS
For support or warranty questions, please contact the manufacturer:
Phone: +56 9 7766 6513
Web: https://www.simplifieramp.com/