DiMarzio HS3 Humbucker Pickup

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
DiMarzio HS3 Humbucker Pickup, Main
DiMarzio HS3 Humbucker Pickup, Main
DiMarzio HS3 Humbucker Pickup, Main
DiMarzio HS3 Humbucker Pickup, Main DiMarzio HS3 Humbucker Pickup, Main DiMarzio HS3 Humbucker Pickup, Main
zZounds Gear Experts Say...
Add more body and overdrive to your tone with this humbucker pickup. It's a noiseless single coil pickup that can be used in all positions.

DiMarzio EQed the HS-3 with a broad low-end while gently rolling back the top. The result is warmth without a glaring high-end - just right for the guitar that needs more body and less screech. The HS-3 hum-free design lends itself to any performance situation. Try HS-3 pickups in a recording environment. No more dumping your best solo because of single-coil noise on the track.

The smooth tone curves of the HS-3 produces a sweet over-drive tone without jagged edges. Coupled with the more glassy, transparent sound of HS-1 or HS-2 pickups in the neck and middle positions, HS-3 pickups add a warmer, fatter tone to round out your sound.

Recommended for all positions.

Tech Talk
Works well in all 3 positions on Strat for slightly warmer-than-usual Strat sound. Also works well as bridge pickup with HS-1 (neck) and HS-2 (middle). Combines in middle and neck positions with bridge humbuckers like PAF Pro, PAF, Air Classic, and Norton.

Wiring: Standard 4-conductor

Magnet: Alnico 5

Output: 93mV

DC Resistance: 23.72K

Year of introduction: 1980

Patent #: 4,442,749

For support or warranty questions, please contact the manufacturer:
Phone: 718-981-9286
Installation Instructions

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer