Catalinbread Starcrash '70s Collection Starcrash Fuzz Pedal
zZounds Gear Experts Say...
A classic-style fuzz tone with tons of saturation on tap, Catalinbread's Starcrash fuzz features a classic "face-style" '70s fuzz saturater circuit.
Overview
The Starcrash isn't an exact recreation of the venerable '70s "Face" circuit, but one refined to truly explore the boundaries of the circuit. Featuring a gooey saturated fuzz circuit with a voltage starve circuit to gently increase harmonic content, you can dial in the transistor voltage that best suits your playing.
They've also installed a Low-Cut knob to tighten up the flubbiness that plagues some silicon fuzz circuits, extending the range up into the low-mids to sit in the mix nicely.
The Fuzz Face debuted in 1966 as a germanium-equipped model, and by the '70s, all Fuzz Faces being made featured silicon componentry for circuit stability reasons. However, the powers that be barely adapted the circuit to its new semiconductors, only a single part was changed to reflect this. In light of this, the Starcrash is the '70s fuzz you wish they would have made from the beginning.
For starters, Catalinbread got rid of that goofy Fuzz knob. They know that 95 percent of all players run it dimed, and the remaining five percent use their guitar's volume knob to rein it in. Secondly, installed a handy Bias control, also known as a "dying battery simulator." This starves the second transistor of voltage and lets you dial in the right amount of texture, from raw and brawny to lean and harmonically rich. The Low-Cut control enacts a tastefully executed filter circuit that cuts the bass frequencies from 40Hz to 500Hz with the turn of a knob. While bias and filter controls cut volume, compensated… read more by giving the Starcrash a little more volume than the typical "Face" circuit, so you can still push your amp regardless of knob settings.
You can use a variety of power sources to power your StarCrash. It supports a standard DC power supply of 9 Volts.DO NOT give the StarCrash AC or a center-positive supply, you will void the warranty. Bad move.
read less
They've also installed a Low-Cut knob to tighten up the flubbiness that plagues some silicon fuzz circuits, extending the range up into the low-mids to sit in the mix nicely.
The Fuzz Face debuted in 1966 as a germanium-equipped model, and by the '70s, all Fuzz Faces being made featured silicon componentry for circuit stability reasons. However, the powers that be barely adapted the circuit to its new semiconductors, only a single part was changed to reflect this. In light of this, the Starcrash is the '70s fuzz you wish they would have made from the beginning.
For starters, Catalinbread got rid of that goofy Fuzz knob. They know that 95 percent of all players run it dimed, and the remaining five percent use their guitar's volume knob to rein it in. Secondly, installed a handy Bias control, also known as a "dying battery simulator." This starves the second transistor of voltage and lets you dial in the right amount of texture, from raw and brawny to lean and harmonically rich. The Low-Cut control enacts a tastefully executed filter circuit that cuts the bass frequencies from 40Hz to 500Hz with the turn of a knob. While bias and filter controls cut volume, compensated… read more by giving the Starcrash a little more volume than the typical "Face" circuit, so you can still push your amp regardless of knob settings.
You can use a variety of power sources to power your StarCrash. It supports a standard DC power supply of 9 Volts.DO NOT give the StarCrash AC or a center-positive supply, you will void the warranty. Bad move.
Specs
- Weight: .4 lbs
- Dimensions: 1.96" X 2.36" X 4.33"
- Dimensions: 1.96" X 2.36" X 4.33"
- Dimensions and Weight in Packaging
- Base Item
- Shipping Weight: 1 lbs
- Shipping Dimensions: 6 x 3 x 3 in
- Manufacturer Part Number (MPN): CAT_Starcrash
- Blemished
- Shipping Weight: 1 lbs
- Shipping Dimensions: 6 x 3 x 3 in
- Manufacturer Part Number (MPN): CAT_Starcrash
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 503-841-5098
Web: https://catalinbread.com/
Phone: 503-841-5098
Web: https://catalinbread.com/
New
Was $149.99
$99.95
FREE -Day Shipping!
Get it
for
Get it
(or get it
with an order of
),
if you order within
Shipping to
This is a carousel with product cards. Use the previous and next buttons to navigate.
People who bought this item also bought
This is a carousel with product cards. Use the previous and next buttons to navigate.