Behringer Vintager AC112 Guitar Amplifier with DFX
No longer available at zZounds


zZounds Gear Experts Say...
Footswitch included.
Overview
Tube character at its best. The VINTAGER AC112. Warm, powerful clean sounds and sexy, singing overdrive.
Favorites
60 Watts RMS UltraTube¬ amp
Original 70-Watt 12" JENSEN¬ speaker
2 channels with separate volume, EQ, and FX
3 FX parameters adjustable per preset
Digital stereo FX unit with 24-bit converters
Insert, stereo aux in and line out, phones, MIDI
Favorites
60 Watts RMS UltraTube¬ amp
Original 70-Watt 12" JENSEN¬ speaker
2 channels with separate volume, EQ, and FX
3 FX parameters adjustable per preset
Digital stereo FX unit with 24-bit converters
Insert, stereo aux in and line out, phones, MIDI
Specs
Audio Inputs
Connector: 1/4 in. mono jack
Type: RF filtered input
Guitar Impedance: 1M ohm unbalanced, approximately
Insert Return Impedance: 10k ohm unbalanced, approximately
Aux Impedance: 10k ohm unbalanced, approximately
Audio Outputs
Connector: 1/4 in. mono jack
Type: Line level output
Insert Send Impedance: 100 ohm unbalanced, approximately
Line Out Impedance: 120 ohm unbalanced, approximately
Max. Output Level: +12dBu unbalanced
Power Amp Output: 60W RMS @ 5%THD + N into 8 ohms
MIDI Interface: 5-pin DIN socket, MIDI In
Converters: 24-bit sigma-delta, 64/128x oversampling
Sample Rate: 46.875 kHz
Display: 2-segment LED
Speaker: 12 in. heavy-duty loudspeaker, model Jensen JCH12/70
Speaker Impedance: 8 ohms
Speaker Power Handling: 70W
Power Supply: 120V/60Hz
Power Consumption: 40W min. 130W max.
Fuse: T 2A H
Mains Connection: Standard IEC receptacle
Dimensions: 18.8 x 20.3 x 10.5/12.5 in., approximately
Weight: 18.5 kg, approximately
Connector: 1/4 in. mono jack
Type: RF filtered input
Guitar Impedance: 1M ohm unbalanced, approximately
Insert Return Impedance: 10k ohm unbalanced, approximately
Aux Impedance: 10k ohm unbalanced, approximately
Audio Outputs
Connector: 1/4 in. mono jack
Type: Line level output
Insert Send Impedance: 100 ohm unbalanced, approximately
Line Out Impedance: 120 ohm unbalanced, approximately
Max. Output Level: +12dBu unbalanced
Power Amp Output: 60W RMS @ 5%THD + N into 8 ohms
MIDI Interface: 5-pin DIN socket, MIDI In
Converters: 24-bit sigma-delta, 64/128x oversampling
Sample Rate: 46.875 kHz
Display: 2-segment LED
Speaker: 12 in. heavy-duty loudspeaker, model Jensen JCH12/70
Speaker Impedance: 8 ohms
Speaker Power Handling: 70W
Power Supply: 120V/60Hz
Power Consumption: 40W min. 130W max.
Fuse: T 2A H
Mains Connection: Standard IEC receptacle
Dimensions: 18.8 x 20.3 x 10.5/12.5 in., approximately
Weight: 18.5 kg, approximately
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Web: https://www.behringer.com/service.html
Web: https://www.behringer.com/service.html
Reviews
Reviewers gave this product an overall rating of 4.5 out of 5 stars.
(70 ratings)
Submitted November 14, 2004 by a customer from hotmail.com
Behringer Vintager AC112 Guitar Amplifier with DFX Customer Review
Verified Customer
zZounds has verified that this reviewer made a purchase from us.
Sound
Very good clean sound- somewhat "compressed" sounding, but not in a bad way. Distortion channelhas some uses, but a slight overdrive is not do-able
Features
Tons of features. My onle wish would be more muti effects, to get, for instance, compression AND delay at the same time. Storable EQ with each patch would be cool.
Quality
So far, so good. Plastic pot shafts worry me. Digital effects worry me.
Value
Great value.
Musical Background:
Active Musician
Musical Style:
Classic rock, Country
4 of 4 people (100%) people found this review helpful. Did you?
Thanks for your opinion!
No longer available at zZounds
In most cases, a product is unavailable because it has been discontinued by the manufacturer
This is a carousel with product cards. Use the previous and next buttons to navigate.