Aviom A16R Rack Mounted Personal Monitor Mixer

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
open zoom image for Aviom A16R Rack Mounted Personal Monitor Mixer, Main
open zoom image for Aviom A16R Rack Mounted Personal Monitor Mixer, Rear
Aviom A16R Rack Mounted Personal Monitor Mixer, Main Aviom A16R Rack Mounted Personal Monitor Mixer, Rear
zZounds Gear Experts Say...
Ideal choice for stage or studio personal monitoring.

The A16R is a single-rack-space stereo digital mixer that can be added to any Pro16 network. Its versatile feature set makes it the ideal choice for a variety of applications on stage or in permanent installations.

For performers using wireless in-ear systems and powered floor wedges, the A16R couples the mixing features of the A16II Personal Mixer with additional connectivity options. Balanced outputs on the rear panel (with both XLR and 1/4 in. jacks) and stereo balanced insert points simplify audio connections to external processors, amps, or wireless transmitters. A front-panel headphone jack is also provided.

The rear-panel stereo Mix In jacks allow a local analog audio source, such as a click track or program material, to be added to the user's mix. A front-panel Mix In level control is also provided.

Features
Remote-controllable sixteen-channel stereo digital mixer

Channel volume and pan control with LED readout

Dedicated Recall, Group, Solo, and Mute buttons

Sixteen user Preset memory locations

Front-panel headphone jack

Master Volume, Treble, and Bass controls

Balanced XLR and 1/4 in. TRS stereo outputs

Balanced 1/4 in. TRS inserts

Auxiliary stereo mix in

Sixteen channel select buttons with dual LEDs

MIDI control over mix and preset save/recall

Remote control via A-Control with the A16CS or via RS232 with approved third-party control systems

Audio Outputs: Impedance matched output

Headphone Output: Front panel; TRS; Tip: Audio Left;
Ring: Audio Right; Sleeve: Ground

Mix input, stereo: Balanced 1/4 in. TRS; front-panel volume control

Insert send/return: Balanced 1/4 in. TRS

A-Net I/O: 1 A-Net In, 1 A-Net Out; RJ45 connectors

D/A Conversion: 44.1/48kHz, 24 bit

Indicators: Pan: 5 LEDs, 4 red, 1 green;

Channel Volume: 12 red LEDs

Stereo Operation: Stereo Link, per channel pair; set at the input module
Variable pan/spread per channel or channel pair

Tone Controls
Treble: +/-12dB at 9kHz shelving

Bass: +/-12dB at 160Hz shelving

Output Impedance: 140 ohms

Freq. Response: 4Hz-22kHz +0.2dB/-3dB

THD +N <0.003%

Signal to Noise (unweighted): -90dB typical, A/D to D/A

Measured from AN-16/i to A-16II

Crosstalk: -90dB

Latency: <0.880 msec (measured from analog input to analog output)

Pro16 A-Net uses unshielded Cat-5e UTP (or better) cable; maximum 500ft (150m) between device

Remote Control: A16CS: A-Control, RJ45 jack, max. 200 ft. (60m)
Compatible with select third-party RS- 232 controllers

Power Supply
External, DC, universal switching type

Input Voltage: 100-240 volts, 50/60Hz, 30VA

Output Voltage: 18-24 VDC, 0.5 amp

Plug Size: 2 mm

Dimensions (WxD): 19 in. (482.6 mm) x 6.7 in. (170.2 mm) , 1U high

Weight: 3.4 lbs (1.54 kilo)

Options:
- A16CS Control Surface
- MT1 Mic Stand Bracket (for A16CS)
- EB1 Extension Bracket

For support or warranty questions, please contact the manufacturer:
Phone: 610-738-9005
Data Sheet
Manual

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer