Audio-Technica U843R Three-Element Multidirectional Boundary Microphone

Ideal for conference room installations, this mic gives you versatile 360-degree coverage in mono or stereo. Unterminated cable attached for custom wiring.

With three cardioid condenser elements in a single housing, the phantom-powered U843R offers a remarkably versatile tool for surface-mount installations. It is ideal for a variety of video and audio conferencing applications, especially when used with an Audio-Technica automatic SmartMixer. Levers on the microphone base allow easy reorientation of two elements to offer 360 or 300 coverage. Since elements can be powered and used individually or in any combination, further flexibility is easily achieved.

For example, with two elements powered, the microphone can provide a figure-of-eight polar pattern; with a single element powered, the microphone functions as a standard cardioid boundary microphone. Installation and repositioning are extremely quick, thanks to four recessed pathways on the base of the microphone that enable the user to route the cable as required to accommodate any installation requirements; no tools or disassembly are needed. The microphone also offers Audio-Technicas innovative UniGuard RFI-shielding technology.

Features:

- Three cardioid condenser elements mounted in a single housing
- Easily reposition two elements (via levers on the microphone base) to offer 360 or 300 coverage; each element can be powered and used individually or in any combination
- Also functions as a stereo boundary microphone
- Provides full, efficient and flexible coverage fewer microphones required
- Small-diameter capsules near boundary eliminate phase distortion and deliver read more clear, high-output performance
- Low-frequency attenuation improves sound pickup without affecting voice quality
- Cable routes through any of four recessed pathways on the microphone base (or down for direct feed through a table surface); no tools or disassembly required
- UniGuard RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- Heavy die-cast case and non-slip silicone foam bottom pad minimizes coupling of surface vibration to the microphone
- Low-profile design with low-reflectance finish for minimum visibility
- U843R is ideal for a variety of video and audio conferencing applications, especially when used with an Audio-Technica automatic SmartMixer
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.
read less

Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid x 3
Frequency Response: 75-15,000 Hz
Low Frequency Roll Off: 80 Hz, 18 dB/octave
Open Circuit Sensitivity: -37 dB (14.1 mV) re 1V at 1 Pa
Maximum Input Sound Level: 134 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: 105 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio: 65 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 11-52V DC, 2 mA typical
Switches: The lever of elements can adjust the proper position
Weight: 160 g (5.6 oz)
Cable: 7.6 m (24.93') long, Unterminated-type, Permanently attached to microphone
Dimensions: 20.0 mm - height ; 85.0 mm – maximum body diameter
Dimensions (Microphone): 85.0 mm (3.35") diameter, 20.0 mm (0.79") height
Output Connector: Unterminated – stripped and tinned
Accessories Included: Soft protective pouch
Dimensions and Weight in Packaging
Base Item
Shipping Weight: 1.25 lbs
Shipping Dimensions: 11 x 6 x 3 in
Manufacturer Part Number (MPN): U843R

For support or warranty questions, please contact the manufacturer:
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com

New

$399.00
  • 8 x  
    $49.88
FREE -Day Shipping!
Get it  for
Get it by if you order within
Shipping to