Audio-Technica ATW-CHG3 Two-Bay Charging Station (3000 Series)

Charge the NiMH batteries for your 3000 Series handheld or body-pack transmitters with the ATW-CHG3, a two-bay charging station with status indicator LEDs.

Overview

The ATW-CHG3 is a two-bay charging station for use with 3000 Series (fourth generation) handheld (ATW-T3202) and body-pack (ATW-T3201) transmitters. The station charges NiMH batteries (not included) while they are housed within a transmitter. It will automatically shut off if alkaline or damaged batteries are detected. Once fully charged, a maintenance charging function ensures that batteries retain their full power for as long as the transmitter remains in the charging station.

The ATW-CHG3 is equipped with power and charging status indicator LEDs for easy monitoring.

Using the AT8687 link kit and AD-SA1230XA AC adapter, up to five ATW-CHG3 charging stations can be linked and powered by a single power supply. The AT8687 and AD-SA1230XA may be purchased separately or bundled with an ATW-CHG3 charging station: ATW-CHG3EXP (charger and link kit), ATW-CHG3AD(charger and AC adapter).

WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.

Specs

Power Requirements: 12V DC 3.0 A
Charging Output: 3.6V DC 500 mA (x2)
Power Consumption: 4.9 W (when 2 transmitters are charging) 27.4 W (when 5 units are connected and 10 transmitters are charging)
Charging Time: Approx. 6.5 hours (1,900 mAh rechargeable battery) Depending on battery type and use pattern.
Operating Temperature Range: 0 degrees C to 40 degrees C (32 degrees F to 104 degrees F)
Dimensions: 185 mm (7.28") x 99 mm (3.90") x 68.5 mm (2.70") (W x D x H)
Net Weight: 400 g (14.1 oz)

Dimensions and Weight in Packaging
Base Item: Shipping Weight: 1.15 lbs; Shipping Dimensions: 8 x 5 x 3 in; Manufacturer Part Number (MPN): ATW-CHG3

Consumer Alert

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones

NOTE: None of the wireless systems we carry are capable of violating the FCC guidelines stated above. We are presenting this information as a matter of legally required disclosure.