Audio-Technica AT-MONO3/SP Dual Moving Coil Cartridge

Looking for a reliable cartridge for your 78 RPM mono shellac records? The Audio-Technica AT-MONO3/SP dual moving coil cartridge is the one for the job!

The AT-MONO3/SP is a high-output (1.2 mV) moving coil cartridge designed specifically for use with 78 RPM mono shellac records.* Due to the horizontal configuration of its PCOCC (Pure Copper by Ohno Continuous Casting) voice coils, the AT-MONO3/SP cartridge only generates electrical signal with horizontal movement, yet it also has appropriate compliance in the vertical direction to keep groove wear to a minimum. The voice coils are wired in series, resulting in one mono signal that is transmitted to the cartridge's white-blue terminals and red-green terminals in order to feed both inputs of a stereo phono preamp.

The cartridge's low-mass 2.5 mil conical stylus is mounted on an aluminum cantilever for excellent tracking of the wider 78 RPM shellac grooves. The cartridge features a strong, rigid body of die-cast aluminum alloy and synthetic resin to eliminate unnecessary vibrations.

* This cartridge with 2.5 mil conical stylus is not compatible with microgroove 33-1/3 and 45 RPM vinyl records. It is designed to play 78 RPM SP (standard play) shellac records.

Features:

- Dual moving coil cartridge designed specifically for use with 78 RPM shellac records*
- Aluminum cantilever with 2.5 mil conical stylus
- Strong, rigid body construction of die-cast aluminum alloy and synthetic resin
- PCOCC (Pure Copper by Ohno Continuous Casting) coil enables pure signal transfer
- Compatible with stereo playback systems

Frequency Response: 20-15,000 Hz
Vertical Tracking Angle: 23 degrees
Vertical Tracking Force: 3.0-7.0 g (5.0 g standard)
Stylus Construction: Nude Square Shank
Recommended Load Impedance: 400-47,000 ohms*
Coil Impedance: 40 ohms (1 kHz)
DC Resistance: 40 ohms
Coil Inductance: 190 uH (1 kHz)
Output Voltage: 1.2 mV (at 1 kHz, 12 cm/sec)
Stylus Shape: 2.5 mil conical
Cantilever: Aluminum pipe
Static Compliance: 10 x 10-6 cm/dyne
Dynamic Compliance: 3.5 x 10-6 cm/dyne (100 Hz)
Mounting: Half-inch
Dimensions: 16.0 mm (0.63") H x 16.6 mm (0.65") W x 26.5 mm (1.04") D
Accessories Included: Non-magnetic screwdriver; 2 washers; 2 nuts; cartridge installation screws (13 mm x 2, 20 mm x 2); plastic protector; brush; PCOCC lead wire set
Body Material: Aluminium/Synthetic Resin
Mounting Feature: Half-inch mount
Stylus Size: Bonded round shank
Type: Horizontal Mono Moving Coil
Weight: 6.8 g (0.24 oz)
Note: Stylus assembly is not field-replaceable.
* When connected to the MC input of a transformer-less phono pre-amp, choose a lower gain position due to the high output voltage (1.2 mV).
Dimensions and Weight in Packaging
Warehouse Resealed, USED
Shipping Weight: 0.17 lbs
Shipping Dimensions: 4 x 3 x 2 in
Manufacturer Part Number (MPN): AT-MONO3/SP

For support or warranty questions, please contact the manufacturer:
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com

USED, Warehouse Resealed

What is USED, Warehouse Resealed?
$174.95
FREE -Day Shipping!
Get it  for
Get it by if you order within
Shipping to