Audio-Technica ATM350UL Cardioid Condenser Instrument Microphone with Universal Clip-on Mounting System

Clip this condenser mic to drum rims, horn bells and more. Includes a 9" gooseneck, clip mount, XLR connector and Hirose HR10 adapter for wireless bodypacks.
This Audio-Technica ATM350a microphone comes with an AT8543 power module, AT8491U universal clip-on mount, AT8490L 9" gooseneck, AT8468 violin mount (hook-and-loop fastener), and a protective carrying case. The microphone includes a Hirose HR10-type output connector for use with Audio-Technica UniPak wireless bodypack transmitters, plus an XLR output adapter for use as a wired mic.

Perfect for use with brass, saxophone and other instruments, the Audio-Technica ATM350UL features the UniMount mounting system giving you the tools to perform with confidence. The system features the ATM350a cardioid condenser microphone, a high-SPL mic that provides a clear, well-balanced response from any instrument. When teamed with the included AT8491U universal clip-on mount and strong, flexible AT8490L 9" gooseneck, the mic can be clipped securely to the bell of your instrument and positioned to stay where you want it - the gooseneck won't flop around no matter how aggressively you move the instrument as you play.

The microphone's cardioid polar pattern isolates the instrument by reducing side and rear pickup, and the switchable 80 Hz high-pass filter on the in-line power module helps control undesired low-frequency noise. The system also includes an AT8468 violin mount with hook-and-loop fastener and a protective carrying case.

Features:

- Low-profile mic design for minimum visibility
- Crisp, clear, well-balanced microphone response, even at high SPLs
- Cardioid polar pattern reduces pickup of sounds from the sides read more and rear, improving isolation of desired sound source
- UniMount universal clip-on mount attaches securely to instrument bell or rim and provides excellent shock resistance for the microphone
- Rugged UniMount 9" gooseneck rigidly holds its shape, keeping microphone accurately positioned even during aggressive play
- In-line power module is equipped with a switchable 80 Hz high-pass filter to control undesired ambient noise
- Interchangeable elements available for hyper-cardioid and omnidirectional polar patterns
- Included violin mount with hook-and-loop fastener provides an additional mounting option
- XLR-M output, with Hirose HR10 adapter included for connecting to Audio-Technica wireless bodypack transmitters
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.
read less
- Element: fixed-charge back plate, permanently polarized condenser
- Polar pattern: cardioid
- Frequency response: 40 - 20,000 hz
- Low frequency roll-off: 80 hz, 12 db/octave
- Open circuit sensitivity: -49 db (3.5 mv) re 1v at 1 pa
- Impedance: 200 ohms
- Maximum input sound level: 159 db spl, 1 khz at 1% t.h.d.
- Dynamic range (typical): 130 db, 1 khz at max spl
- Signal-to-noise ratio: 65 db, 1 khz at 1 pa
- Phantom power requirements: 11- 52v dc, 3.5 ma typical
- Switch: flat, roll-off
- Weight (microphone): 14.5 g (0.5 oz)
- Weight (power module): 90 g (3.2 oz)
- Dimensions (microphone): 1.49" long, 0.48" maximum body diameter
- Dimensions (power module): 92 mm (3.62") long, 18.9 mm (0.74") diameter
- Output connector (power module): integral 3-pin xlrm-type
- Cable: 4.0 m (13.1') long (permanently attached to microphone), 3.2 mm (0.13") diameter, 2-conductor shielded cable with hirose hr10-type connector
- Optional interchangeable elements: ue-h hyper-cardioid (100°*); Ue-o omnidirectional (360*)
- Dimensions (power module): 92 mm (3.62") long, 18.9 mm (0.74") diameter
- Output connector (power module): integral 3-pin XLR-M type
- Cable: 4.0 m (13.1') long (permanently attached to microphone), 3.2 mm (0.13") diameter, 2-conductor shielded cable with Hirose HR10-type connector
- Optional interchangeable elements: ue-h hyper-cardioid (100 degrees); Ue-o omnidirectional (360 degrees)
Dimensions and Weight in Packaging
Base Item
Shipping Weight: 1.5 lbs
Shipping Dimensions: 13 x 6 x 4 in
Manufacturer Part Number (MPN): ATM350UL
If you have additional warranty questions, please contact the manufacturer at 330-686-2600