Audio-Technica AT-ART9XA Dual-Coil Phono Cartridge

The AT-ART9XA's dual moving coils and Shibata stylus unleash complex details hidden within your vinyl collection to create the ultimate listening experience.

An update to the AT-ART7, the AT-ART9XA non-magnetic core MC cartridge features a Shibata stylus on a boron cantilever and an Audio-Technica reference transducer (ART), a component used only in our premium cartridges. Compared with the magnetic core used in most MC cartridges, non-magnetic core cartridges feature no magnetic distortion, allowing for natural timbre and a precise sound field. Although conventional non-magnetic cores struggle with output voltage, the AT-ART9XA features a newly designed coil armature with an improved output voltage of 0.2 mV (1 kHz, 5 cm/sec). Threaded cartridge mounting holes make installation to a headshell or integrated tonearm incredibly easy.

Features:

- High-separation, wide-response dual moving coil:
The dual moving coils of the system are aligned in an inverted V shape, which provides high separation and wide response for clear sound localization and minimal distortion.
- Shibata stylus and 0.28 mm diameter solid boron cantilever:
The Shibata stylus ensures accurate high and mid-low range reproduction, and the boron cantilever provides excellent response characteristics.
- Neodymium magnet and permendur yoke for significantly increased magnetic energy:
The specially designed magnetic circuit optimizes energy in the magnetic gap where the generator coils are located.
- Newly designed coil armature for improved output voltage:
A complete redesign of the armature offers a 20% increase in the cross-sectional area of the generator coil to read more provide an output voltage of 0.2 mV.
- PCOCC coils for high-fidelity transmission:
Using PCOCC (Pure Copper Ohno Continuous Cast) wire for the coils achieves pure signal transfer.
- Machined aluminum base for stable playback:
The machined aluminum base supports both the magnetic circuit and the vibration system, ensuring excellent playback stability.
- Hybrid body reduces undesirable parasitic resonance:
The machined aluminum housing combined with high-rigidity plastic helps reduce undesirable parasitic resonance for improved sound quality.
- Threaded cartridge mounting holes for easy installation on headshells or integrated tonearms:
The cartridge body includes threaded screw holes that allow installation on headshells or integrated tonearms with only two screws (no nuts necessary).
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.
read less

- Type: MC
- Frequency response: 20 to 50,000 Hz
- Output voltage: 0.2 mV (1 kHz, 5 cm/sec.)
- Channel separation: 30 dB (1 kHz)
- Output balance: 0.5 dB (1 kHz)
- Tracking force: 1.6 to 2.0 g (1.8 g standard)
- Coil impedance: 12 ohms (1 kHz)
- DC resistance: 12 ohms
- Recommended load impedance: = 100 ohms (when head amplifier connected)
- Coil inductance: 2.5 uH (1 kHz)
- Static compliance: 20 x 10-6 cm/dyne
- Dynamic compliance: 10 x 10-6 cm/dyne (100 Hz)
- Stylus: Nude Shibata
- Stylus curvature radius: 2.7 x 0.26 mil
- Cantilever: 0.28 mm (0.011") diameter solid boron
- Vertical tracking angle: 20*
- Dimensions: 17.3 mm (0.68") x 16.8 mm (0.66") x 25.0 mm (0.98") (H x W x D)
- Threaded hole: M2.6 x 2
- Weight: 8.5 g (0.30 oz)
- Accessories: Non-magnetic screwdriver, Brush, Washer x 2, Cartridge installation screws (M2.6) (5.0 mm (0.20") x 2, 8.0 mm (0.31") x 2, 10.0 mm (0.39") x 2, 12.0 mm (0.47") x 2), Protector
Dimensions and Weight in Packaging
Base Item
Shipping Weight: 0.25 lbs
Shipping Dimensions: 4 x 3 x 2 in
Manufacturer Part Number (MPN): AT-ART9XA

For support or warranty questions, please contact the manufacturer:
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com

New

$1,500.00
  • 18 x
  • 12 x
    $125.00 with zZounds
  • 8 x
    $187.50 with zZounds
FREE -Day Shipping!
Get it  for
Get it by if you order within
Shipping to