RF Venue D-ArcDistro4 Bundle with DISTRO4 and Diversity Architectural Antenna

Combine antennas on your wireless system for efficient, crosstalk-free operation with the RF Venue D-Arc/Distro4 antenna and splitter bundle.

This turn-key bundle from RF Venue includes everything needed to configure up to 5 channels of wireless microphones.

Included in the bundle:
- One patent-pending Diversity Architectural Antenna system to reduce signal dropouts
- One DISTRO4 4-channel antenna distribution unit with internal power supply and cascade ports
- Two 25' premium made-in-USA low-loss double-shielded coaxial cables

Diversity Architectural Antenna

The Diversity Architectural Antenna by RF Venue is a high performance antenna system for wireless microphones. Featuring a slim profile enclosure, the Diversity Architectural Antenna can be installed in any position on a wall or ceiling and can be painted to match any interior. Using a unique patent-pending dual-feed antenna design, both A and B diversity connections are provided, so there's no need to install two separately spaced antennas resulting in a more professional look that room designers and architects appreciate.

The Diversity Architectural antenna installs in minutes, with a wall or ceiling-mounted rear plate that is pre-drilled with multiple mounting hole options. The rear plate then simply connects to the front plate, secured with the included mounting screws. Simply connect the two rear-mounted BNC terminated coaxial cables to your in-wall or in-ceiling coaxial cable run and the Diversity Architectural is ready for use.

The Diversity Architectural antenna builds on the highly acclaimed Diversity Fin, eliminating the most common signal read more dropouts caused by changes in angle and orientation of the RF signal. Ideally suited for conference rooms, multi-purpose meeting spaces, training rooms, and houses of worship, the Diversity Architectural fits into any interior design and delivers professional RF performance in a sleek industrially designed enclosure.

DISTRO4 4-way active antenna splitter

DISTRO4 is a 4-way active antenna splitter plus cascade port with external power that allows you to share one pair of diversity antennas with up to 5 wireless receivers. Built in a full metal housing it ships with 8 BNC cables and 4 dc power cables to connect to your receivers. Multiple DISTRO4s can be connected together up to 25 receivers to a single diversity pair of antennas.

To utilize directional antennas with more than two receivers, an antenna distributor is the right tool for the job. With a single Diversity Fin and DISTRO4, you can avoid crosstalk bleed from multiple whip antennas, and remove questionable wall warts and unneeded power strips that can cause other avoidable issues.

Two Coaxial Cables Included

This bundle includes two 25' premium made-in-USA low-loss double-shielded coaxial cables. Coaxial cabling can make the difference between flawless RF performance and total system failure. Even the slightest crimp or ding in coaxial cable can cause signals to drop sharply or short out. RF Venue provides premium made in USA low loss, 50O RG8X coaxial cable with BNC male connectors for wireless audio applications. RF Venue cables are custom made to their specifications: double shielded braid over foil with a perfect balance between loss and flexibility. All cables are terminated in-house and QC on calibrated Agilent network analyzers for guaranteed performance.
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.
read less

-Operating Frequencies: 470-616 MHz
-Bandwidth: 146 MHz
-Impedance: 50 ohms
-Average Return Loss: -6.4 dB
-Pattern Type: Diversity Flood
-Gain: 3 dBd
-F/B Ratio: N/A
-F/S Ratio: N/A
-Polarization: Linear
-Dimensions: 280x280x50mm / 11"x11"x2"
-Weight: 0.9 kg / 2 lbs
-Mount Location: Wall or Ceiling
-Operating Temperature: -10-40C / 14-104 F
-Color: White
-Connector(s): BNC Female
-Frequency Range: 470-952 MHz
-RF Output Level (Gain): 3 dB (2 dB)
-Cascade Output Level: 0 dB ~ +2 dB
-Output Connection Isolation: = 25 dB
-Third Order Intercept Point: 24 dBm
-Impedance: 50 ohms
-Power Consumption: 60 W
-Input AC Voltage: 100~240 V switching
-DC Over Coax (to External Antennas): 12-14 VDC
-Output DC Voltage (to Receiver Jacks): +12 V
-Dimensions: 480(W) X 45(H) X 250(D) mm
-Weight: 2.15 Kgs
Dimensions and Weight in Packaging
Base Item
Shipping Weight: 14.75 lbs
Shipping Dimensions: 22 x 15 x 9 in
Manufacturer Part Number (MPN): D-ARCDISTRO4

Consumer Alert

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones

NOTE: None of the wireless systems we carry are capable of violating the FCC guidelines stated above. We are presenting this information as a matter of legally required disclosure.

For support or warranty questions, please contact the manufacturer:
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com
Web: https://www.audio-technica.com/en-us/support/category/product-support/


FREE -Day Shipping!
Get it  for
Get it by if you order within
Shipping to