Audio-Technica ATW-CHG3aEXP Two-Bay Charging Station Expander for 3000 Series Wireless (with Link Kit)

zZounds Gear Experts Say...

Build your A-T 3000 Series charger rig. This add-on unit ships with no power supply, and has a Link Kit to connect to your existing ATW-CHG3A/CHG3NA charger.

Overview

The charging station works with 3000 Series transmitters, 3000 Series IEM receiver, and System 20 PRO transmitters. The station charges NiMH batteries (not included) while they are housed within a transmitter or receiver. It will automatically shut off if alkaline or damaged batteries are detected. Once fully charged, a maintenance charging function ensures that batteries retain their full power for as long as the transmitter remains in the charging station. The ATW-CHG3A is equipped with power and charging status indicator LEDs for easy monitoring.

The AT8687 kit includes a link cable, link plate, and four plate screws that link the ATW-CHG3A charging station to another ATW-CHG3A or ATW-CHG3NA charging station. Additional AT8687 kits can be purchased to link up to five charging stations, all of which can be powered by a single AD-SA1230XA AC adapter (sold separately).

Features:

- ATW-CHG3A two-bay charging station with AT8687 link kit
- Charging station works with 3000 Series transmitters, 3000 Series IEM receiver, and System 20 PRO transmitters
- Charges NiMH batteries while they are housed within a transmitter
- Automatically shuts off if alkaline or damaged batteries are detected
- Indicator LEDs for easy monitoring of power and charging status
- AT8687 kit (link cable, link plate, and four plate screws) links the ATW-CHG3A to another ATW-CHG3A or ATW-CHG3NA charging station
- With additional AT8657 kits (all sold separately), up to five charging stations can be linked… read more and powered by a single AD-SA1230XA AC adapter
- Transmitters power off automatically when placed in the charging station and power on automatically when removed

WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.

Specs

- Power Requirements: 12V DC 3.0 A
- Charging Output: 3.6V DC 500 mA (x2)
- Power Consumption:
4.9 W (when 2 transmitters are charging)
27.4 W (when 5 units are connected and 10 transmitters are charging)
- Charging Time: Approx. 6.5 hours (1,900 mAh rechargeable battery. Depending on battery type and use pattern)
- Operating Temperature Range: 0 degrees C to 40 degrees C (32 degrees F to 104 degrees F)
- Dimensions (charger only): 185 mm (7.28"") x 99 mm (3.90"") x 68.5 mm (2.70"") (W x D x H)
- Net Weight (charger only): 400 g (14.1 oz)

Dimensions and Weight in Packaging

Base Item

Shipping Weight: 1.8 lbs
Shipping Dimensions: 12 x 9 x 5 in
Manufacturer Part Number (MPN): ATW-CHG3AEXP

Consumer Alert

Most users do not need a license to operate this wireless system. Nevertheless, operating this system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's website at www.fcc.gov/cgb/wirelessmicrophones

NOTE: None of the wireless systems we carry are capable of violating the FCC guidelines stated above. We are presenting this information as a matter of legally required disclosure.