Audio-Technica AT-LP3XBT Belt-Drive Turntable with Bluetooth

open zoom image for Audio-Technica AT-LP3XBT Belt-Drive Turntable with Bluetooth, White, AT-LP3XBT-WH, Action Position Back

Audio-Technica AT-LP3XBT Belt-Drive Turntable with Bluetooth, White, AT-LP3XBT-WH, Action Position Front

Audio-Technica AT-LP3XBT Belt-Drive Turntable with Bluetooth, White, AT-LP3XBT-WH, Action Position Back

zZounds Gear Experts Say...

Cables got you down? Bring your hi-fi setup into the digital age with this Bluetooth-transmitting belt-driven turntable -- a great value from Audio-Technica.

Overview

The AT-LP3XBT turntable combines 60 years of high-fidelity design with convenient Bluetooth(R) technology, giving you all the benefits of vinyl with the freedom to connect to Bluetooth(R) speakers or headphones.

The successor model of the previous AT-LP3 comes with beneficial upgrades, such as wireless compatibility with the high-quality Qualcomm(R) aptX Adaptive audio and Qualcomm(R) aptX(TM) audio codecs, the AT-VM95C cartridge, which is compatible with any of Audio-Technica's VM95 Series replacement styli, detachable RCA output cables, and the external AC adapter, which handles the AC/DC conversion outside of the chassis, reducing noise in the signal chain.

Features:

- Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
- High-fidelity audio with Bluetooth wireless technology
- Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology or to wired audio systems and powered speakers via included dual RCA output cable
- Compatible with the high-quality Qualcomm(R) aptX Adaptive audio and Qualcomm(R) aptX(TM) audio codecs
- Balanced straight tonearm with hydraulically damped lift control and rest
- AT-VM95C cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
- Includes the AT-HS3 universal headshell
- Built-in switchable phono/line pre-amplifier with detachable dual RCA output cable with grounding wire
- Anti-resonance, die-cast… read more aluminum platter with felt mat
- Damped base construction for reduced low-frequency feedback coloration
- External AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
- Included Accessories: detachable RCA output cable (Dual RCA male to dual RCA male with ground), 45 RPM adapter, removable hinged dust cover, and detachable power cable
- Available in black (AT-LP3XBT-BK) and white (AT-LP3XBT-WH)

WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.

Specs

Communication System:: Bluetooth version 5.2
RF Output:: 2.5 mW EIRP
Maximum Communication Range:: Line of sight - approx. 10 m (33')
Frequency Band:: 2.402 GHz to 2.480 GHz
Modulation Method:: GFSK, Pi/4DQPSK, 8DPSK
Compatible Bluetooth Profiles:: A2DP
Supported Codecs:: Qualcomm(R) aptXTM Adaptive audio, Qualcomm(R) aptXTM audio, SBC
Turntable Type:: Belt-drive, fully automatic operation
Motor:: DC motor
Drive Method:: Belt drive
Speeds:: 33-1/3 RPM, 45 RPM
Turntable Platter:: Die-cast aluminum
Wow and Flutter:: < 0.2% WRMS (33 RPM) at 3 kHz
Signal-to-Noise Ratio:: > 60 dB
Output Level (PHONO):: 4.0 mV nominal at 1 kHz, 5 cm/sec
Output Level (LINE):: 252 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain:: 36 dB nominal, RIAA equalized
Tonearm Type:: Static balanced straight tonearm
Effective Length:: 221.5 mm
Overhang:: 19 mm
Maximum Tracking Error Angle:: Less than 3.0 degrees
Stylus Pressure Adjustment Range:: 1 to 4 g
Applicable Cartridge Weight Range (including headshell):: 14.5 to 20 g
Cartridge Model:: AT-VM95C
Cartridge Type:: VM
Recommended Load Impedance:: 47,000 ohms
Output Voltage:: 4.0 mV (1kHz, 5cm/sec)
Stylus:: 0.6 mil bonded conical
Cantilever:: Aluminum pipe
Tracking Force Range:: 1.8 to 2.2 g (standard 2.0 g)
Cartridge Weight:: 6.1g (0.22 oz)
Headshell Model:: AT-HS3BK
Headshell Weight:: 11.1 g (including lead wires), 10.3g (excluding lead wires)
Headshell Overhang Adjustment:: +/- 8 mm
Power Supply Requirements:: 100-240 V, 50Hz/60Hz, 0.6 A Max.
Power Consumption:: 2 W
AC Adapter:: 12 V, 0.5 A
Dimensions:: 435.6mm (17") x 374mm (15") x 128mm (5.0") (W x D x H)
Weight:: 5.0 kg (11 lbs)
Accessories Included:: Dust cover, felt mat, platter (with drive belt), counterweight, headshell (AT-HS3BK) with VM stereo cartridge (AT-VM95C), 45 RPM adapter, RCA audio cable (approx. 1.0 m / 3.3'), AC adapter (approx. 1.5 m / 4.9')
Replacement Stylus (sold separately):: AT-VMN95C
Replacement Headshell (sold separately):: AT-HS3BK
Replacement Belt (sold separately):: AT-LP3XBT exclusive belt