ASI Audio 3DME Bluetooth Active Ambient In-Ear Monitor Headphones

No longer available at zZounds
Start hearing in 3D! ASI Audio's 3DME Bluetooth in-ear monitors feature Active Ambient technology and binaural mics to capture the sound of your environment.

The ASI Audio 3DME Bluetooth IEM system is a completely tunable in-ear monitor system that lets you hear live room sound along with your in-ear mix! Get spectacular sound you control in live, studio, or streaming performances with the ASI Audio app and miniature microphones embedded in each earpiece. Hear your music, the audience and the room as never before.

True 3D ambient audio

The ASI Audio 3DME IEM is embedded with binaural 3D mics to bring the full range of room ambience to your ears as a discrete, controllable signal. So in addition to an enhanced monitor mix, you hear your band mates and audience in a soundstage of your choosing.

Keep your ears out of the red

Discerning artists are proactive about hearing health. 3DME technology was developed and patented by Dr. Michael Santucci of Sensaphonics, the audiologist of choice for some of the world's top artists and performers.


Hear what musicians are saying about their 3DME in-ears:


Fluff from Riffs, Beards, and Gear reviews the 3DME system:


Features:

- Hear everything: your music, bandmates, and audience mixed your way for a more natural in-ear experience that will help you perform better and really enjoy playing live
- Active Ambient technology provides controlled 3D ambience with full earphone isolation
- Embedded binaural microphones capture full frequency range, full dynamic range natural ambience with accurate 3D directionality
- Full-range drivers provide reference-quality sound without read more crossover distortions
- Compact bodypack processing unit combines a monitor mix with the ambient sound
- Patented active signal processing enables distortion-free ambience capture up to 135 dB-SPL
- Monitor Out jack provides for monitoring of the complete reproduced sound, including by the dBCheck
- Intuitive smartphone app sets multiple stored body pack processing options
- Selectable ambience level, with left, right adjusted together or separately
- Selectable limiting of maximum average reproduced levels, with left, right adjusted together or separately, and with the limiting action linked between channels or independent
- Multiband frequency equalization of the reproduced sound, with left, right adjusted together or separately
- Body pack provides ambient level up/down buttons, programmed either for step-wise action or pre-selected levels, for quick in-use adjustment of ambience level
- Body pack incorporates rapid limiting of clipping-level signals sensed at multiple circuit points
- Body pack has rechargeable Li-Ion battery and bluetooth interface
- Body pack provides LED indication of battery state-of-charge, charging status, and USB power

What's in the Box?

- 3DME In-Ear Monitors
- 3 pairs eartips: S, M, L
- Bodypack with lithium ion battery
- Stereo jumper cable
- USB bodypack charging cable
- Wall charger
- Carrying case
- Earpiece cleaning tool
- Shirt clip
read less

- Frequency Response: 20 Hz - 20 kHz
- Microphone Input Overload: 135 dB-SPL
- Maximum Output: 500 Hz, 122 dB-SPL
- Microphone Equivalent Input Noise: 27 dBA-SPL
- Monitor Equivalent Input Noise: -104 dBV(A) (EQ disengaged), -101 dBV(A) (EQ engaged)
- Output Noise: 20 dBA-SPL (EQ disengaged), 23 dBA-SPL (EQ engaged)
- Acoustic Insertion gain: Off, -24 dB to +12 dB in 16 steps
- Monitor Equivalent Input Noise: -104 dBV(A) (EQ disengaged), -101 dBV(A) (EQ engaged)
- Output Noise: 20 dBA-SPL (EQ disengaged), 23 dBA-SPL (EQ engaged)
- Acoustic Insertion gain: Off, -24 dB to +12 dB in 16 steps
- Monitor Sensitivity: 500 Hz, 102 dB-SPL for -20 dBV (100 mVrms) input
- Monitor Input Impedance: 10 kOhm
- Limiter Type: Adaptive attack, average responding, frequency selective
- Limiter Threshold: 84 dBA to 105 dBA in 8 steps and Off
- Maximum Limiter Gain Reduction: 20 dB
- Multiband EQ: +/-12 dB at 60, 140, 330, 770, 1800, 4300, 10000 Hz
- Latency: 0 (EQ disengaged), 350 usec (EQ engaged)
- Operating Time (from full charge): >7 hours
- Charge Time (fully depleted battery): ~4 hours
- Battery State-of-Charge Indication: Four LEDs, with flashing low battery warning
- Wireless Connectivity: Bluetooth
- Warranty: 1-year Limited Warranty

- In the box:
- 3DME In-Ear Monitors
- 3 pairs eartips, S, M, L
- Bodypack with lithium ion battery
- Stereo jumper cable
- USB bodypack charging cable
- Wall charger
- Carrying case
- Earpiece cleaning tool
- Shirt clip

For support or warranty questions, please contact the manufacturer:
Phone: 833-274-2244
Email: customerservice@asiaudio.com

Reviewers gave this product an overall rating of 5 out of 5 stars. (1 ratings)
Submitted October 20, 2021 by a customer from hcpss.org
"These Are UNBELIEVABLE!"
Overall: 5 out of 5 stars
Verified Customer zZounds has verified that this reviewer made a purchase from us.
"These "controllable" ambient in-ears are a GAME CHANGER!! I let my band mates sample them with the band playing at volume - everyone of them had that same shocked (WTH?!!) expression on their faces!! GAME CHANGERS!!!"You finally get to hear "EVERYTHING" in the mix and in the room.It takes a minute for the initial setup, but that's not a deal breaker. After you get them setup it's plug and play!
Did you find this review helpful?
Thanks for your opinion!