The Little Bass Amp That Could
Need a great stack to pack into your van for road gigs? The Ampeg MICRO-VR bass amplifier half stack to the rescue? Don't let its mini size fool you: with an SVT MICRO-VR head and a SVT210AV Micro Classic cabinet, this Ampeg dishes out tones-a-plenty down to a rumbling 40 Hz. This stack pushes 200 watts worth of classic SVT tone through two 10" Eminence speakers, and features gain, bass, midrange, treble, and volume controls to shape your signal. This tower of tone also boasts limiter and -15 dB pad switches, 1/8" instrument in and headphone jacks, two speaker outs for adding extra cabs, and an XLR line out if you want to go straight into the mixer. Get yourself ready for a powerful stack that won't break your back.
200 Watts of Classic All-SVT Tone
Your SVT MICRO-VR head harnesses the power of 200 watts to fuel your axe's signal with some serious punch. This amp projects that classic sought-after SVT tone full of low-end crunch and punch. Plug your bass in and feel that awesome rumble make its way through the floor and into your very soul. That's what playing through an Ampeg SVT is all about!
Three-Band EQ with Ultra Mid Control
To get your signal crafted just right, your Ampeg MICRO-VR bass amplifier half stack features gain, bass, midrange, treble, and volume controls in a no-nonsense display. This little-stack-that-could shows you that powerful and full-bodied tone can be at your fingertips without a huge and heavy rig; you don't always need boat-loads of controls, settings, or bass models. Keep things simple, and bring on the rock.
Two 10" Eminence Speakers
The SVT210AV Micro Classic cabinet's 10" Eminence speakers suit the forceful punch that the SVT MICRO-VR head dishes out. Your Ampeg MICRO-VR half stack is great for smaller shows, and for bigger stages, you can take advantage of the MICRO-VR head's XLR direct out to go straight into the mixing board. This cab delivers a frequency response of 58 Hz to 5 kHz, giving you a nice hotspot of forceful sonic clout. This baby also features a usable low frequency of 40 Hz, so you'll never be short of bottom end to keep things anchored.
SVT Micro-VR Head Features:
- Solid-state SVT amp head
- 200 watts of power at 4 ohms
- One channel of classic SVT tone
- Gain, bass, midrange, treble, and volume controls
- Limiter and -15 dB pad switches
- One 1/4" instrument input
- One 1/8" audio in and one 1/8" headphone in
- Two speaker outs and one XLR line out
- Weighs in at only 9.9 pounds
SVT 210AV Speaker Cabinet Features:
- Two 10" Eminence speakers
- Power handling of 200 watts at 8 ohms
- Frequency response of 58 Hz to 5 kHz
- Low usable frequency response of 40 Hz
- Weighs in at only 25.9 pounds
zZounds is an authorized dealer of Ampeg products.
Ampeg Micro VR Head
Preamp: Solid State
Power Amp: MOSFET
RMS Power Output: 200 watts at 4 ohms
Tone Controls: 3-Band
Mid Tone Control: Ultra Mid
Balanced Line Out: with Pre/Post and Pad
Dimensions (W x H x D): 12 x 5.5 x 10"
Ampeg SVT210AV Cabinet
LF Driver: 2 x 10" Eminence Speakers
RMS Power Handling: 200 Watts at 8 ohms
Frequency Response (-3dB): 58Hz-5kHz
Usable Low Frequency (-10dB): 40Hz
Nominal Impedance: 1 x 8 ohms (Mono)
Dimensions (W x H x D): 13 x 24 x 11"
Weight: 25.9 Pounds
- Weight, Dimensions, and Manufacturer Part Numbers