ADJ Monster Beam Effect Light
No longer available at zZounds





zZounds Gear Experts Say...
Whether you use its built-in lighting programs, sound-activated mode, or control by DMX, the Monster Beam effect light is sure to amaze partygoers.
Overview
The ADJ Monster Beam is a high output Moonflower effect that produces very thick beams of light powered by 25x 1-Watt LEDs (5x Red, 5x Green, 5x Blue, 5x Amber and 5x White). This fixture has exciting built-in lighting shows, or users can run the effect in sound active or DMX mode.
The Monster Beam has a 4-button DMX LCD display on the rear panel to help user easily navigate through the built-in features. This fixture provides DMX and power linking on the rear panel, a hanging yoke to attach the fixture to truss, and a safety loop to secure the fixture with safety cable as a secondary precaution.
The Monster Beam is compatible with the easy-to-use UC3 hand-held controller, has a wide 29-degree beam angle and only draws 40W maximum power.
Learn more about the ADJ Monster Beam:
- 3 Operational modes: Sound Active, Show (Auto Program Run), & DMX Controlled
- 1 DMX Channel
- Built-In Light Show Programs
- Wide beam spread covers a large area
- Flicker Free
- Linkable via 3-pin XLR cable
- 4-button DMX LCD display on rear panel
- AC outlet on side to daisy chain power (up to 7 Monster Beam's @ 120V and 12 Monster Beam's @ 230V)
- Compatible with American DJ UC3 Series easy-to-use controllers (sold Separately)
- Strobe effect (Using UC3 Controller)
- Includes single yoke to mount on a wall or from trussing bracket
- Safety Loop on rear panel
- Long life LEDs (Rated at approximately… read more 50,000 hrs.) read less
The Monster Beam has a 4-button DMX LCD display on the rear panel to help user easily navigate through the built-in features. This fixture provides DMX and power linking on the rear panel, a hanging yoke to attach the fixture to truss, and a safety loop to secure the fixture with safety cable as a secondary precaution.
The Monster Beam is compatible with the easy-to-use UC3 hand-held controller, has a wide 29-degree beam angle and only draws 40W maximum power.
Learn more about the ADJ Monster Beam:
Features:
- LED DMX Moonflower with very thick Red, Green, Blue, Amber & White Beams- 3 Operational modes: Sound Active, Show (Auto Program Run), & DMX Controlled
- 1 DMX Channel
- Built-In Light Show Programs
- Wide beam spread covers a large area
- Flicker Free
- Linkable via 3-pin XLR cable
- 4-button DMX LCD display on rear panel
- AC outlet on side to daisy chain power (up to 7 Monster Beam's @ 120V and 12 Monster Beam's @ 230V)
- Compatible with American DJ UC3 Series easy-to-use controllers (sold Separately)
- Strobe effect (Using UC3 Controller)
- Includes single yoke to mount on a wall or from trussing bracket
- Safety Loop on rear panel
- Long life LEDs (Rated at approximately… read more 50,000 hrs.) read less
Specs
- Beam angle: 29 degrees
- Light Source: 25 x 1W total LEDs : 5 Red, 5 Green, 5 Blue, 5 Amber and 5 White
- Multi-voltage: 100-240V, 50/60Hz
- Power Draw: 40W max
- Dimensions (L x W x H): 12.5 x 10 x 8.25" / 213 x 254 x 207mm
- Weight: 8 lbs. / 3.3 kg.
- Light Source: 25 x 1W total LEDs : 5 Red, 5 Green, 5 Blue, 5 Amber and 5 White
- Multi-voltage: 100-240V, 50/60Hz
- Power Draw: 40W max
- Dimensions (L x W x H): 12.5 x 10 x 8.25" / 213 x 254 x 207mm
- Weight: 8 lbs. / 3.3 kg.
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 323-582-2650
Email: support@adj.com
Web: https://www.adj.com/support
Phone: 323-582-2650
Email: support@adj.com
Web: https://www.adj.com/support
No longer available at zZounds
In most cases, a product is unavailable because it has been discontinued by the manufacturer
This is a carousel with product cards. Use the previous and next buttons to navigate.