Avantone Pro CLA-10A Chris Lord-Alge Active Studio Monitor System

Hear what's really going on in your mix. The crisp, accurate sound of Avantone CLA-10A Chris Lord-Alge monitors leaves nowhere for harsh frequencies to hide.

Avantone Pro CLA-10A active studio monitors feature the AV10MHF and AV10MLF drivers from the passive CLA-10, as well as the cabinet construction from the passive models. The CLA-10A's add a beefy Class A/B power amp section.

One of the most common questions asked about the CLA-10's is which version of the originals are they based on. Now Avatone can proudly say... all of them! The CLA-10A's have an all new "VTPC" knob or "Variable Tissue Paper Control." This VTPC allows you to simulate anything from the Vertical "m" model to the horizontal "Studio" model and everything in between. This tone control allows each user to choose the best tweeter brightness that serves their individual needs.


Take a look inside Chris Lord-Alge's studio in our exclusive interview:


Most two-way active speakers use a switch mode supply and Class D amplifier. While this has proven to work well in recent years, Avatone are still traditionalists. With the success of the CLA-10 and CLA-200 amplifier combination, Avatone decided to stay with what engineers all over the world have come to expect from this combination. The CLA-10 Active uses a linear power supply and 200 watts of Class AB output. Yes, it requires a heatsink. Yes, it weighs more. Yes, it sounds awesome.

Avatone use a monolithic integrated circuit Class AB amplifier with wide voltage range and high current output capability. Operating in Parallel Mode with two devices ganged together to deliver higher output power into low impedance loads, read more allowing better thermal performance at high power. At low power, THD is a phenomenal 0.005%; at rated load it is 0.1%, yielding excellent performance at power compared to class D amps. The circuit uses a mixed bipolar MOS high voltage technology called BCDII 100/120 which avoids secondary breakdown phenomena. This technology handles high current output without unwieldy circuit complexity and external components. This makes it possible to deliver very high power in a reasonable package with the clean, smooth sound of a linear amplifier.

The system is being run at +/-40 VDC, yielding a rock solid 200WRMS at 1kHz into 8 ohms. Rather than use a switch mode power supply with the associated noise, Avatone decided to stay traditional with a linear power supply. The power supply uses a massive old school toroidal transformer for the classic performance of an AB amplifier. Many companies use SMPS and Class D for this type of system. Avatone made the decision to stay with classic technology in order to maintain the legacy sound that everybody associates with this design.
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.
read less

- System Type: Active Full-Range Two-Way Stereo Pair
- System Frequency Response: 60Hz-20,000Hz (Accessible Musical Range)
- Components:
- Low Frequency: AV10-MLF 18Cm Cone
- High Frequency: AV10-MHF 3.5Cm Soft Dome
- Cabinet: 10.4 Liter Sealed Design, 18mm MDF With Real Wood Veneer
- Cabinet Dimensions: 381.5mm X 215mm X197.5mm ( 15”X 8 ½”X 7- ¾ ” )
- Weight: 8.2Kg / 18 Lbs (Each)
- SPL: 104dB
- Peak Musical Output: 110dB (Music Program Material)
- Amplifier: 200W Class Ab Linear Supply
- THD: 0.05% At 1Khz, 1W
- Balanced Inputs: Combination XLR And Phone Jack
- Unbalanced Input: RCA Phono Jack
- Volume: +0dB, -120dB
- VTPC: Variable Tissue Paper Control Fc 1.8Khz +6dB, -30dB.
- Power: On/off Switch
- Ground Lift: Switch
- Power: 115Vac/230Vac Selectable
- Power Consumption:
- Standby: 3W
- Full Output: 250W
Dimensions and Weight in Packaging
Black, Pair
Shipping Weight: 46.5 lbs
Shipping Dimensions: 23 x 20 x 14 in
Manufacturer Part Number (MPN): AVN CLA10A
Limited-Edition Natural Mahogany, Pair
Shipping Weight: 44.75 lbs
Shipping Dimensions: 23 x 19 x 14 in
Manufacturer Part Number (MPN): AVN CLA10ALTD

For support or warranty questions, please contact the manufacturer:
Phone: 845-642-3697

Reviewers gave this product an overall rating of 5 out of 5 stars. (3 ratings)
Submitted February 3, 2021 by Michael R in Gilbert, AZ

"Sound Clarity"

Overall: 5 out of 5 stars
(see rating details)
Verified Customer zZounds has verified that this reviewer made a purchase from us.
I thought I'd throw up a review since nobody's done it already (surprisingly). I just set these up about 3 days ago and am still in the process of breaking the cones in, so keep that in mind. One thing that mystifies me is the description on Zzounds lacking what these are specifically meant to be: an exact replica of the renowned Yamaha NS10 monitors. And I don't mean a clone like some pedals/effects/channel strips, etc. I mean that Avantone actually sourced the same materials down to the doping used on the cones. My understanding is that the only difference is in the addition of active power and different I/O options. That to me was the biggest selling point and I had to learn about this from another website that is selling these. I will always support Zzounds first when purchasing though because of their payment options. I think we all agree that we wouldn't have near the gear we have without that. Anyway, having never listened to the original NS10s I can't give a comparative A/B description (there are many such videos on the 'Tube doing just that though). Regardless of the comparison to the Yamaha's sound, I can give a description of the sound to my ears. I don't call myself an audiophile because I'm not wealthy and I do enjoy having friends. That being said, I have some relatively high end HiFi equipment at home just for listening to vinyl and TiDAL. Thus, I can comment on the clarity, etc. I will tell you that these are extremely revealing speakers. I popped on a casual read more recording I made with a Tascam Dr 40x which admittedly was never really mixed and certainly not mastered but nonetheless sounded adequate through the headphone out. What can I say? I cringed. The mids on these are right up front in bare bones honesty. You will not be able to cover up any fudging you might try to slip by in the mix. Which of course, if you know the reasons for the Yamaha's ubiquitous presence in every professional recording studio, is entirely the point. Mixing on these forces you to separate all the clashing mid frequencies into a harmonious palette. You could think of it like shooting a beam of light into a prism. What was previously singular (sometimes in really bad way) can be heard well enough and in enough detail to spread out those frequencies into a beautiful harmony. I previously owned the Avantone Mix Cubes which attempt the same thing. However, while the Mix Cubes certainly do this, they are unlistenable to in any other fashion. They were not built for sitting back and listening to some tunes. These CLA10As are different in that regard. These do a better job at displaying the muddled mids than the Mix Cubes, while at the same time giving a very balanced reproduction of commercial albums. If I had to compare them in a way that might make sense to you I would say they are very similar to listening to Audio Technica's high end headphones. Very flat with no scooped mids and no bass or treble boost. Originally I wasn't sure I would want these as there are reports of a total lack of bass and thus the necessity of a subwoofer. I can tell you that this assessment is incorrect, at least to my ears. Again I will say that it is very close to AT's frequency response where there is certainly bass present but it is confined to a proper placement in the mix. My walls still vibrate from the bass at loud levels. The bass does not, however, ever clog your ears to what else is going on. Again, very revealing. The highs are not silky but far far away from grating or fatiguing. You might call them bell like in their clarity but certainly not chimed. I have also read that these will not do if they are your only monitors for mixing. I don't see how that could be. Nevertheless, before I purchased them I had narrowed my choices down to these or the Yamaha HS8s with subwoofer. The HS8s have reports of stunning clarity as well so I wasn't sure which way to go. Naturally I wanted both ;). Not being able to do this I finally decided upon these, and I am so glad I did. I still do plan on adding another pair of near field monitors (Yamaha HS8 or possibly the Neumans), but that's more of a "I've now got the tools the pros use so there are no more excuses" idea. Of course, if you've already got other near fields then these can be even more valuable because you can immediately see how they translate. In total, I would say that if you are on the fence because you are thinking that these are too purpose specific (only for balancing mids) then abandon that fear because they work incredibly well as your only studio monitors. Does a second pair help? Does a second guitar/bass/synth help? I'm sure we can agree that it does. But I am more than satisfied to have only these until I can add that extra addition to my studio. And again, I've only had these up for 3 days; the sound that these produce will only get warmer as they wear. Also, the 200 watts is certainly noticeable but I've yet to hear any distortion. So, yeah, you should buy 'em even if you don't have or don't want to buy a subwoofer.

Musical Background:
Started piano at 6 and haven't stopped with some instrument or another since

Musical Style:
Everything from Krautrock to 70s Country Western Swing to Beatles to Bach
read less
25 of 26 people (96%) people found this review helpful. Did you?
Thanks for your opinion!

Black, Pair

$999.00
  • 18 x  
  • 12 x  
    $83.25
  • 8 x  
    $124.88
FREE -Day Shipping!
Get it  for
Get it by if you order within
Shipping to