JBL SRX922 3-Way Powered Loudspeaker (2x12")

Note: JBL SRX900 speakers ship without a power cable. Connectors are included in the box for building your own power or jumper cable.

The SRX922 is a compact, acoustically three-way, dual 12-inch powered point-source loudspeaker engineered for applications requiring high output and precise directivity control from a trapezoidal full-range enclosure. It is an ideal choice for high-output mains systems, side-fills, or as a high-performance point-source element within larger SRX900 deployments. The system delivers an exceptional output-to-weight ratio thanks to its innovative acoustic design, with dual LF woofers providing higher output than traditional 15-inch three-way systems in a significantly more compact enclosure. Multiple M10 QuickLink suspension points support fast, secure integration with a variety of dedicated accessories for touring and installed applications. Integrated DSP and amplification provide a true plug-and-play experience, ensuring consistent, optimized performance anywhere in the world. A full-featured software suite provides comprehensive control and monitoring across Windows, macOS, and iPadOS platforms.

Features:

- Includes dual 12-inch LF woofers, a 6.5-inch horn-loaded MF driver, and a 1.5-inch annular-diaphragm compression driver
- Symmetrically-arranged dual LF section provides double the low-frequency headroom of traditional single-woofer designs
- Dipole configuration delivers enhanced vertical directivity control
- Horn-loaded MF section… read more enables LF drivers to operate in their most efficient and controlled bandwidth
- Dual 90* 60* Progressive Transition waveguides provide smooth, predictable coverage
- Four large, flared ports extend low-frequency response down to 50 Hz
- 80 Hz high-pass preset available for applications using SRX900 subwoofers
- Voicing and phase response carefully optimized to match SRX900 line-source products
- Integrated amplification delivers plug-and-play operation
- Rear LCD enables fast configuration
- DSP includes 24 user-adjustable filters, 2,000 ms delay, and essential loudspeaker management tools
- Eight M10 Quick-Link attachment points are provided for suspension using standard M10 eye bolts
- Constructed from outdoor-grade Baltic birch plywood for excellent durability

Note: JBL SRX900 Speakers Ship Without a Power Cable

Each JBL SRX900 cabinet has two Neutrik powerCON TRUE1 chassis connectors: an Inlet to power that speaker, and an Outlet to loop power through to the next cabinet. The Inlet also serves as the mains on/off switch -- there is no separate power switch.

In place of a finished cable, each speaker ships with two bare Neutrik connector ends: one female connector that mates with the Inlet, and one male connector that mates with the Outlet. JBL has shipped two generations of these connectors across the SRX900 line, so check your model's spec sheet or the SRX900 manual for the exact part numbers in your box.

To Make Your Own Power Cable

Build a cable with the included female connector on one end and the mains plug for your location on the other (in the US, a standard Edison NEMA 5-15P, or a 20 A connector if your venue has 20 A service). Both included connectors use screw terminals, so no soldering is required. Wire the connector carefully and double-check it before applying power -- miswiring the power connector can damage the speaker's input board. The SRX900 power supply is universal and runs on 100-240 VAC, 50/60 Hz.

To daisy-chain cabinets from a single feed, build jumpers with the male connector on one end (from the upstream cabinet's Outlet) and a female connector on the other (into the next cabinet's Inlet). Because every cabinet includes one of each, a chain of any length has exactly the connectors it needs.

powerCON TRUE1 is rated 20 A at 250 VAC in the US. Consult the SRX900 manual's current-draw tables before deciding how many cabinets to run from one circuit.

To Buy a Ready-Made Power Cable

Look for a cable with a female powerCON TRUE1 end and your local mains plug (such as Edison/NEMA 5-15P) on the other. Neutrik's current part is the NAC3F-TRUE1-S; cables built with the earlier NAC3FX-W-TOP mate with the same Inlet and work identically, since the newer part is Neutrik's direct replacement for it. read less