Yamaha MW10C 10-Channel USB Mixer with Compression

No longer available at zZounds
Yamaha's 10-channel MW10C mixer is easy to travel with, and boasts features like 1-knob compression and plug-and-play USB interfacing.

With Yamaha's MW10C USB Mixing Studio mixers, making great music is easier than ever before. Combined with the powerful Cubase AI4 audio/MIDI sequencing software, the MW series provides a comprehensive tabletop studio setup for the solo recording musician and for the traveling producer/arranger. Connect the MW to a USB terminal on your laptop or desktop computer, and you've got an instant, high-quality audio recording studio at your command. The MW delivers true plug-and-play USB audio input/output interfacing-without the need for special software drivers-and lets you easily record mono inputs or two- track stereo mixes of multiple sources to your computer.

Easy-to-use 1-Knob Compression

Compression-the taming of wildly varying levels in vocals, bass and guitar-is one of the most important effects used in recording and mixing. It is also one of the most subtle and difficult to use. Not with the MW series mixers, however. The innovative 1-knob analog compressor (on the mono input channels) lets you dial in just the amount of compression you need in recording, without having to set multiple parameters like threshold, ratio and makeup gain. One knob does it all for you-instantly giving you great, punchy sound.

Easy-access Panel and High-Quality Parts

Top-mounted input and output connectors make setting up and re-patching your system quick and easy. Both models feature high-quality Neutrik balanced XLR connectors for the microphone inputs. Long-throw, smooth-action faders read more give you precise and tactile control over signal levels. The mixer also has a bright and large 12-segment LED meter for visual signal indication.

Flexible 10-channel Configuration

The MW10C gives you a total of eight inputs, including four ultra-low-noise mic preamps, plus an additional stereo channel for a total of ten inputs. The high-performance balanced microphone inputs also have a phantom power switch, allowing you to take advantage of the superior sonic quality of professional-level condenser microphones.

Monitor Mix

This convenient feature gives you simple control over the balance between the signals being recorded and the playback signals being monitored. This is particularly helpful when recording several sources at the same time, letting you use a single knob to adjust the balance of the playback and recording signals for monitoring purposes. Naturally, this doesn't affect the recording level; it simply allows you to control what you want to hear.
read less

Frequency Response
ST OUT, REC OUT, AUX (EFFECT*) SEND, MONITOR OUT): -3.0, 0, 1.0 dB, GAIN: min(CH 1-2, CH 3/4-5/6), 20Hz-20kHz, refer to the nominal output level @1kHz

Total Harmonic Distortion (THD+N)
ST OUT: Less Than 0.1 %, +14dBu, 20Hz-20kHz, Input Gain Control at minimum

Hum and Noise
CH INPUT 1-4 MIC: -128 dBu, EIN(Equivalent Input Noise): Rs=150ohms, GAIN:max

ST OUT, REC OUT: -87 dBu, ST MASTER CONTROL at nominal level and all Ch level controls at minimum.

AUX (EFFECT*) SEND: -85 dB, All Ch AUX controls at minimum.

ST OUT, REC OUT: -64 dB, ST Master control and one Ch level control at nominal level. (CH1,2)

ST OUT: -100 dB, Residual Output Noise.

Crosstalk@1 kHz
Input to Output: -70 dB, STEREO L/R, CH 1-2, PAN panned Hard left or right.

Phantom Voltage
MIC: +48 V

USB Audio I/O Sampling Frequency
44.1, 48 kHz, Depend on the application of PC

Input HPF
CH 1-2 and CH 3/4-5/6, 80Hz, 12dB/oct

Input Equalization +15,-15dB maximum. Turn over/roll-off frequency of shelving:
3dB blow maximum variable level.

High: 10 kHz shelving (CH 1-2, CH 3/4-5/6)
Mid: 2.5 kHz peaking (CH 1-2, CH 3/4-5/6)
Low: 100 Hz shelving (CH 1-2, CH 3/4-5/6)
High: 10 kHz shelving (CH 7/8, CH 9/10**)
Low: 100 Hz shelving (CH 7/8, CH 9/10**)

PEAK Indicator
Red LED turns on when post EQ (ST CH: or post Mic HA) signal reaches -3dB below clipping (17dBu).

LED Level Meter
Pre MONITOR Level: 2x7 points LED meter (PEAK,+6,+3,0,-5,-10,-20 dB)
PEAK lights if the signal comes within 3 dB of the clipping level.

Power Supply Adapter: PA-10

Power Consumption: 21 W

Dimensions (WxHxD): 256.6 x 62.2 x 302.5 mm

Net Weight: 1.6 kg

System Requirements for MW Series Mixers

Windows Vista
Computer: Windows-based computer with built-in USB interface

OS: Windows Vista

CPU: 1 GHz or better Intel Core / Pentium / Celeron processor

Memory: More than 1 GB

Windows XP
Computer: Windows-based computer with built-in USB interface

OS: Windows XP Professional / XP Home Edition

CPU: 750 MHz or better Intel Core / Pentium / Celeron processor

Memory: More than 128 MB

Macintosh
Computer: Macintosh computer with built-in USB interface

OS: Mac OS X 10.3.3 or higher

CPU: Macintosh G3 processor 300 MHz or better

Memory: More than 128 MB

Cubase AI4 System Requirements

Windows
OS: Windows XP Professional / XP Home Edition

CPU: Intel Pentium 1.4 GHz or better

Available Memory: More than 512 MB

Hard Disk : Free disk space of 400 MB or more; high-speed hard disk

Audio Interface: Windows DirectX / ASIO compatible

Macintosh
OS: Mac OS X 10.4 or higher

CPU: Power Mac G4 1 GHz or Core Solo 1.5 GHz or better

Available Memory: More than 512 MB

Hard Disk: Free disk space of 400 MB or more; high-speed hard disk

For support or warranty questions, please contact the manufacturer:
Phone: 714-522-9011
Web: https://usa.yamaha.com/support

Reviewers gave this product an overall rating of 5 out of 5 stars. (40 ratings)
Submitted February 5, 2009 by a customer from yahoo.com

"Keep it Real!"

Overall: 5 out of 5 stars
(see rating details)
Verified Customer zZounds has verified that this reviewer made a purchase from us.
I chose this product because of past Yamaha products i've owned , the names is "Quality" I liked everything about this product.I will keep this product until it dies, then buy another!
Sound
The sound is excellent! it has a very 'Clear'sound not that hissin sound. My vocals are more clear & drum sounds seem to hit harder. Compared to others i've owned this one is the best so far!
Features
I like the compression & built-in effects, I don't use the effect all the time, but always good to have. All of the features fit my needs
Ease of Use
For me,It was a quick 'glance'at the manual,and it was ON! I think most people like easy to use equipment, that way you can get right to work!
Quality
This product is very-well built for my needs,everything was intact when i purchased it, No problems at all.I use this product for Home Recording only,So i won't have any wear&tear issues.
Value
Worth the price!
Manufacturer Support
The best Support, is NOT needing it!
The Wow Factor
I like the 'Heavy feel'the colored knobs are cool& sturdy. Also having the right amount of inputs!

Musical Background:

Drummer/Hobbyist

Musical Style:

R&B / Hip-Hop
23 of 24 people (96%) people found this review helpful. Did you?
Thanks for your opinion!

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer