TASCAM TM-60 Battery-Powered Small Diaphragm Condenser Microphone
No longer available at zZounds
No phantom power? No problem -- this workhorse pencil condenser microphone can be powered by an AA battery. Mini tripod stand, windscreens and case included.
Overview
Among the TASCAM microphone series that have been tested with the TASCAM products, the TASCAM TM-60 Battery-Powered Condenser Small Diaphragm Microphone is the only model that does not require phantom power supply. It is optimum for the mobile environment where phantom power supplies cannot always be provided. It is optimum especially when operating the audio interface by the bus power of PC or when using the condenser microphones by the devices operated by batteries such as DP-008EX or DR-44WL, for it enables to use the condenser microphones without consuming the electric power of the devices.
- Cardioid (Unidirectional)
- Operation by AA battery
- Includes accessories of wind screen, mic stand, cable, mic clip and mic case
Features:
- Condenser-type microphone- Cardioid (Unidirectional)
- Operation by AA battery
- Includes accessories of wind screen, mic stand, cable, mic clip and mic case
Specs
- Model: Condenser
- Directivity: Cardioid
- Frequency response: 50Hz -18,000Hz
- Output impedance: 200Ω
- Load impedance: <1kΩ
- Sensitivity: -45dB +/-3dB (0dB=1V/Pa at 1kHz)
- Max. SPL: 126dB
- S/N ratio: 70dB
- Connector: 3 pin XLR, Male
- Phantom power: DC1.5V (AA battery)
- Dimensions: 28(W)×190(H)×28(D) mm / 1.1(W)×7.4(H)×1.1(D) inch
- Weight: 420g/0.93lb (Microphone body only)
- Accessory: Mic clip (screw dia. 5/8 inch), Soft case, Mic cable, Wind screen, Mic stand, 5/8-3/8 Conversion adapter
- Directivity: Cardioid
- Frequency response: 50Hz -18,000Hz
- Output impedance: 200Ω
- Load impedance: <1kΩ
- Sensitivity: -45dB +/-3dB (0dB=1V/Pa at 1kHz)
- Max. SPL: 126dB
- S/N ratio: 70dB
- Connector: 3 pin XLR, Male
- Phantom power: DC1.5V (AA battery)
- Dimensions: 28(W)×190(H)×28(D) mm / 1.1(W)×7.4(H)×1.1(D) inch
- Weight: 420g/0.93lb (Microphone body only)
- Accessory: Mic clip (screw dia. 5/8 inch), Soft case, Mic cable, Wind screen, Mic stand, 5/8-3/8 Conversion adapter
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 323-726-0303
Web: https://tascam.com/us/support/contact
Phone: 323-726-0303
Web: https://tascam.com/us/support/contact
No longer available at zZounds
In most cases, a product is unavailable because it has been discontinued by the manufacturer
This is a carousel with product cards. Use the previous and next buttons to navigate.