Fuchs Plush Cream Overdrive Pedal

No longer available at zZounds
Using a combination of IC and FET transistors, the Cream produces warm, tube-like overdrive that is easily dialed in via three knobs: level, tone and gain.

The Fuchs Plush "Cream" pedal is a unique product, designed by Andy Fuchs. It uses a unique circuit topology which uses a combination of IC's and selected FET's, for lowest noise and the warmest tube like overdrive tones possible.

The Plush "Cream" is a simple overdrive pedal, which is easily dialed in for the widest range of overdrive tones. The gain control is set to control the amount of distortion. It can go from a mild blues style distortion, to a high gain shredder overdrive when set at maximum gain. The tone control goes from a dark (full counter clockwise) tone, to a bright chimey tone as the control is turned up. Finally, the level control sets the final output level of the pedal. This control is used to set the solo level when the pedal is activated (LED on). The input impedance is 1-Meg, suitable for most any guitar or signal source.

The output impedance is approximately 1-K, which is buffered, to drive long cables as well as subsequent effects. The Plush "Cream" provides a hard wire bypass, which means when not in use (LED not lit) the input is connected directly to the output, with no loading of the signal, and no active devices in the signal path. The unit is activated when a standard 1/4" guitar cable is plugged into the input jack. If using this unit on battery power, the guitar cable should be unplugged when it's not in use, to extend battery life. The DC jack on the side is a standard 2.1 mm tip negative adaptor input. The output of the adaptor must be 9-Volts read more DC. This pedal may be driven by a Plush "Pure Gain" pedal to achieve higher levels of gain and distortion. read less

- Dimensions: 4.625 x 3.625 x 1.25"
- Weight: 1 lb.
- Input: 1/4" jack
- Output: 1/4" jack
- Power supply: 9V battery, or 2.1 mm tip negative adaptor input with 9V DC.
- Input impedance: 1Meg
- Output impedance: 1K
- Enclosure: Solid Aluminum

For support or warranty questions, please contact the manufacturer:
Phone: 973-772-4420
Email: info@fuchsaudio.com
Web: https://fuchsaudiotechnology.com/contact-us/