Eminence Impero 15A Replacement PA Speaker, 2,400 Watts

No longer available at zZounds
Load your bass amp cabinet with this hefty 15-inch speaker driver. Eminence's Impero 15A is also ideal for small subwoofers or full-range PA speakers.

Eminence is proud to introduce three advanced high-power additions to the Professional Series: the Impero 12A, 15A, and 18A. Italian for "empire", Impero sets the tone for this elite offering of high quality, hand-built loudspeakers.

Take an in-depth tour of the Eminence speaker factory:


Using high motor strength with balanced Vas and Mms, the Impero series plays extremely loud and low in compact vented designs. Advancements include a 1/2 inch thick by 7.5 inch diameter machined top plate, one piece machined T-yoke, and a 4 inch deep wound fiberglass voice coil. These features combined with an ultra-linear long-excursion suspension and bumped motor assembly allow the Impero series to move serious air, generate serious SPL, while handling tremendous amounts of power.

The 15 inch Impero 15A is suited for two-way top boxes, full-range two-way and three-way boxes, bass guitar boxes, and small subwoofers, and is rated at 1,200 watt continuous / 2,400 watt program. With a frequency range of 46 Hz to 2 kHz, this 15 inch has the extension at both ends to go low and high, perfect for small vented boxes with conventional sized horns. This model is also available in a 4 ohm version, the Impero 15C.

- Nominal Basket Diameter: 12 in., 304.8mm
- Power Rating
-- Watts: 1100 watts
-- Music Program: 2200 watts
- Resonance: 42.75Hz
- Usable Frequency Range: 56Hz - 3kHz
- Sensitivity: 93dB
- Magnet Weight: 109 oz.
- Gap Height: 0.5 in., 12.7mm
- Voice Coil Diameter: 4 in., 101.6mm
- Thiele & Small Parameters
- Resonant Frequency (fs) : 42.75Hz
- DC Resistance (Re) : 5.58
- Coil Inductance (Le) : 1.46mH
- Mechanical Q (Qms) : 13.84
- Electromagnetic Q (Qes) : 0.33
- Total Q (Qts) : 0.32
- Compliance Equivalent Volume (Vas) : 70.2 liters / 2.48 cu.ft.
- Peak Diaphragm Displacement Volume (Vd) : 339.4cc
- Mechanical Compliance of Suspension (Cms) : 0.17mm/N
- BL Product (BL) : 19.49 T-M
- Diaphragm Mass Inc. Airload (MMs) : 83.47 grams
- Efficiency Bandwidth Product (EBP) : 129.8
- Maximum Linear Excursion (Xmax) : 6.22mm
- Surface Area of Cone (Sd) : 545.4 cm2
- Maximum Mechanical Limit (Xlim) : 12.5mm
- Mounting Information
- Recommended Enclosure Volume: 33.98-118.9 liters / 1.2-4.2 cu.ft.
- Driver Volume Displaced: 184.8 cu.in. / 3 liters
- Overall Diameter: 12.38 in., 314.45mm
- Baffle Hole Diameter: 11.06 in., 280.92mm
- Front Sealing Gasket: Fitted as standard
- Rear Sealing Gasket: Fitted as standard
- Mounting Holes Diameter: 0.27 in., 6.98mm
- Mounting Holes B.C.D. : 11.69 in., 296.93mm
- Depth: 6.13 in., 155.7mm
- Net Weight: 24.2 lbs, 10.9 kg
- Shipping Weight: 26.6 lbs, 11.7 kgs
- Materials of Construction
- Coil Construction: Copper voice coil
- Coil Former: Fiberglass
- Magnet Composition: Ferrite magnet
- Core Details: Bumped Vented Extended core
- Basket Materials: Die-cast aluminum basket
- Cone Composition: Water Resistant Treated Paper Cone
- Cone Edge Composition: Treated Cloth cone edge
- Dust Cap Composition: Water Resistant Treated Paper dust cap

For support or warranty questions, please contact the manufacturer:
Phone: 502-845-5622

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer