Diago Little Smasher Guitar Amplifier Head (5 Watts)
No longer available at zZounds






zZounds Gear Experts Say...
This amp head is small enough to fit in the palm of your hand but loud enough for small gigs, the studio, or for practice.
Overview
The Diago Little Smasher is an amazingly lively and dynamic 5-Watt guitar amp head squeezed into a pedal-sized enclosure. It's ideal for small gigs, studio and home use, with more than enough volume to annoy the neighbours.
A fully fledged amp head, its four analogue modelled cascading gain stages adjusted by Gain and Volume controls give a range of tones from chimey clean to plexi-esque rock crunch, and it's designed to work especially well with pedals up front if you need to push it further or want multiple channels. It also has active Bass and Treble controls with a massive 15dB boost and 30dB cut available on each.
5-Watts doesn't sound like a lot, but it's surprisingly loud and can drive a wide range of cabinets; anything up to a 4x12 which it does with ease - and sounds great with plenty of grunt.
Its rich, harmonically complex tone and road worthy reliability comes by combining the very best design, components and construction methods.
Tired of lugging heavy heads, and combos around, now all you need to take with you is a guitar, pedal board and cab. Why has no-one thought of this before?
- Controls - Volume | Gain | Treble | Bass
- Compact & portable (600g - 120 x 43 x 86mm) - pedal-sized solution that can be velcroed to your pedal board
- 4 to 16 Ohms output impedance - can be used with any speaker cabinet
- 2-band active EQ - +15dB / -30dB, offers more tonal range than a 3-band passive EQ
-… read more Powered on standard 9V DC @ 600mA
- Very tough - 2mm fabricated carbon steel construction which is durable and shock resistant
- Package includes - Little Smasher, power supply, manual, Velcro and rubber foot pad. read less
A fully fledged amp head, its four analogue modelled cascading gain stages adjusted by Gain and Volume controls give a range of tones from chimey clean to plexi-esque rock crunch, and it's designed to work especially well with pedals up front if you need to push it further or want multiple channels. It also has active Bass and Treble controls with a massive 15dB boost and 30dB cut available on each.
5-Watts doesn't sound like a lot, but it's surprisingly loud and can drive a wide range of cabinets; anything up to a 4x12 which it does with ease - and sounds great with plenty of grunt.
Its rich, harmonically complex tone and road worthy reliability comes by combining the very best design, components and construction methods.
Tired of lugging heavy heads, and combos around, now all you need to take with you is a guitar, pedal board and cab. Why has no-one thought of this before?
Diago Little Smasher Amp Features
- 5-Watt Portable Guitar Amp Head- Controls - Volume | Gain | Treble | Bass
- Compact & portable (600g - 120 x 43 x 86mm) - pedal-sized solution that can be velcroed to your pedal board
- 4 to 16 Ohms output impedance - can be used with any speaker cabinet
- 2-band active EQ - +15dB / -30dB, offers more tonal range than a 3-band passive EQ
-… read more Powered on standard 9V DC @ 600mA
- Very tough - 2mm fabricated carbon steel construction which is durable and shock resistant
- Package includes - Little Smasher, power supply, manual, Velcro and rubber foot pad. read less
Specs
Model Name: Little Smasher LS-01
Type: Pedal-sized guitar amplifier head
Single channel, all analogue signal path with 4 analogue modelled cascading gain stages and solid state Class A/B power amplifier
Output:
- 5 Watts RMS clean (before distortion)
- 4-16 Ohm output impedance - to drive any passive speaker cabinet
DO NOT CONNECT TO ANY ACTIVE ELECTRONICS
Channels: 1
Controls:
- Volume
- Gain
- Treble
- Bass
- Active EQ +15dB / -30dB
Casing: 2mm fabricated carbon steel
Power: 9V DC @ 600mA - power supply included
Weight: 600g
Dimensions: 43(H) x 120(W) x 86mm(D)
Package Includes:
Little Smasher
Power supply
Manual
Velcro
Rubber foot pad
Type: Pedal-sized guitar amplifier head
Single channel, all analogue signal path with 4 analogue modelled cascading gain stages and solid state Class A/B power amplifier
Output:
- 5 Watts RMS clean (before distortion)
- 4-16 Ohm output impedance - to drive any passive speaker cabinet
DO NOT CONNECT TO ANY ACTIVE ELECTRONICS
Channels: 1
Controls:
- Volume
- Gain
- Treble
- Bass
- Active EQ +15dB / -30dB
Casing: 2mm fabricated carbon steel
Power: 9V DC @ 600mA - power supply included
Weight: 600g
Dimensions: 43(H) x 120(W) x 86mm(D)
Package Includes:
Little Smasher
Power supply
Manual
Velcro
Rubber foot pad
No longer available at zZounds
In most cases, a product is unavailable because it has been discontinued by the manufacturer
This is a carousel with product cards. Use the previous and next buttons to navigate.