Celestion TF1218 Bass-Mid Speaker (200 Watts, 12")
No longer available at zZounds
zZounds Gear Experts Say...
Upgrade the low-mid drivers in your 2-way PA cabs with Celestion TF1218s. This 12" replacement speaker handles up to 100 watts RMS and 200 watts peak power.
Overview
The Celestion TF1218 replacement speaker is the perfect choice if you want to replace or upgrade the driver in your 2-way PA cab. The TF1218 speaker is designed to provide maximum audio quality extremely low distortion. Plus, with Celestion you know you can trust it night after night!
- Provides 97dB sensitivity and 100 Watts RMS power handling
- 1.75 inch High temperature copper voice coil wound on polyimide for increased reliability
- Kevlar-loaded cone with sealed surround and damping for reduced distortion
- Suitable for use in 2-way systems
Features:
- 12 inch Bass and mid-range driver offering a superior price/performance ratio- Provides 97dB sensitivity and 100 Watts RMS power handling
- 1.75 inch High temperature copper voice coil wound on polyimide for increased reliability
- Kevlar-loaded cone with sealed surround and damping for reduced distortion
- Suitable for use in 2-way systems
Specs
General:
- Nominal diameter: 305mm/12in
- Power rating: 100Wrms
- Nominal impedance: 8 ohms
- Sensitivity: 97dB
- Frequency range: 60-4500Hz
- Voice coil diameter: 45mm/1.75in
- Chassis type: Pressed steel
- Magnet type: Ferrite
- Magnet weight: 0.88kg/31oz
- Coil material: Round copper
- Former material: Polyimide
- Cone material: Kevlar loaded paper
- Surround material: Cloth-sealed
- Suspension: Single
- Xmax: 2mm/0.08in
- Gap Depth: 6mm/0.24in
- Voice coil winding width: 10mm/0.39in
Mounting Information:
- Diameter: 309mm/12.17in
- Overall depth: 125mm/4.92in
- Cut-out diameter: 283mm/11.14in
- Mounting slot dimensions: 7.9mm/0.31in
- Number of mounting slots: 4
- Mounting PCD range: 297mm/11.69in
- Weight: 2.7kg/6.0lb
- Nominal diameter: 305mm/12in
- Power rating: 100Wrms
- Nominal impedance: 8 ohms
- Sensitivity: 97dB
- Frequency range: 60-4500Hz
- Voice coil diameter: 45mm/1.75in
- Chassis type: Pressed steel
- Magnet type: Ferrite
- Magnet weight: 0.88kg/31oz
- Coil material: Round copper
- Former material: Polyimide
- Cone material: Kevlar loaded paper
- Surround material: Cloth-sealed
- Suspension: Single
- Xmax: 2mm/0.08in
- Gap Depth: 6mm/0.24in
- Voice coil winding width: 10mm/0.39in
Mounting Information:
- Diameter: 309mm/12.17in
- Overall depth: 125mm/4.92in
- Cut-out diameter: 283mm/11.14in
- Mounting slot dimensions: 7.9mm/0.31in
- Number of mounting slots: 4
- Mounting PCD range: 297mm/11.69in
- Weight: 2.7kg/6.0lb
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: +44 (0)1473 835300
Web: https://celestion.com/about-us/contact-us/
Phone: +44 (0)1473 835300
Web: https://celestion.com/about-us/contact-us/
No longer available at zZounds
In most cases, a product is unavailable because it has been discontinued by the manufacturer
This is a carousel with product cards. Use the previous and next buttons to navigate.