Blue's original Yeti USB mic scored a home run with home recording enthusiasts for its extreme ease-of-use and the versatility of four selectable pickup patterns. The Yeti Pro improves on the hit original with a stereo balanced XLR output, and professional 192 kHz/24-bit digital audio over its USB out. By popular demand, it's the Pro version of Blue's distinctive Yeti microphone -- ready to plug into your XLR preamp, mixer, or audio interface, and still holding its own as a great-sounding USB mic.
Pick a Pattern, Any PatternIf you're familiar with the original Yeti, you know about its unique multi-pattern capabilities. Blue has outfitted the Yeti Pro with the same proprietary three-capsule array that can record in mono cardioid, bidirectional figure-eight, omnidirectional, or even stereo X-Y pickup patterns, making it more flexible than the typical studio multi-pattern condenser. Use Blue's helpful manual to find out which pattern is best for your needs (try bidirectional for interviews, stereo for a vocal group, or cardioid for a voiceover), and click the dial on the back of the mic to switch patterns. And yes, the stereo X-Y pattern outputs separate left and right channels, via a standard 5-pin XLR cable. Use the included XLR breakout cable to split the signal into left and right, or plug in any standard 5-pin XLR if you like. When operating your Yeti Pro in any of the other three non-stereo modes, it'll send dual mono signals to each side of the XLR breakout cable, so you can run it into two recording systems for a handy built-in safety.
Analog or Digital? Get BothNew to the Yeti Pro is the ability to switch between Analog Mode (the XLR output) and Digital Mode (the USB output). The analog XLR outputs easily connect the Yeti Pro to any mixer or audio interface that has XLR inputs, a portable recorder like the Zoom H4n, or the console in any pro studio. But if you'd prefer to skip all that and plug the mic directly into your computer with the included 10-foot USB cable, the Yeti Pro's digital output is no less "pro" -- delivering crystal-clear 24-bit audio at up to 192 kHz. In USB mode, you can use the Yeti Pro's handy mute button and headphone amp with volume knob right on the microphone itself. Not sure which of the four pickup patterns to use for your band rehearsal? It's a snap to cycle through the four patterns while listening in the headphones straight off the mic. And the built-in headphone amp is also perfect for zero-latency monitoring when you record voiceover at your desk. In fact, when the Yeti Pro is connected via USB, its standard 1/8" headphone plug becomes a great-sounding audio output for your computer. If you like to listen to music in headphones at your desk, why not do it through the Yeti Pro's crisp, noiseless D/A converter? Chances are, you'll hear a noticeable improvement from your computer's built-in headphone jack.
Yeti's Distinctive DesignA look around Blue Microphones' extensive catalog reveals that they're no slouches in the design department. Indeed, Blue specializes in distinctive, well-built mics that are meant to look as good as they sound. The Yeti Pro is no exception, sporting a pebbled black finish that sets off the shiny metal grill. The heavy-duty desk mount has a rubber isolation pad on the bottom, and you can tighten the desk mount's two set screws to secure the mic in any position, even flipping it all the way upside down for compact storage. Or remove the desk mount entirely and use the standard thread mount on the bottom to attach it to any standard studio mic stand. The Yeti Pro even works with the Blue Ringer custom shock mount for excellent isolation from floor vibrations.
Features:- 5-pin stereo XLR output with 12" XLR breakout cable for left and right channels
- USB port with 10-foot USB cable included
- On-board A/D converter delivers up to 24-bit/192kHz digital audio via USB
- Four selectable pickup patterns utilizing Blue's unique 3-capsule array -- choose cardioid, bidirectional, omnidirectional, or stereo
- Built-in mute button with indicator light
- Headphone amp with 1/8" jack for use in USB mode
- Heavy-duty desk stand included
- Standard thread mount fits any studio mic stand
If you're thinking of getting a Blue Yeti, chances are you've done your homework on great-sounding USB mics. So why not future-proof your setup by including the capability to record at a pro sample rate, and maybe plug into analog XLR inputs down the road? Whether you're a real pro at recording or simply a enthusiastic amateur, the Yeti Pro gives you unmatched flexibility and sound quality that you won't find in any other USB microphone.
zZounds is an authorized dealer of BLUE products.
Microphone and Performance
- Power Required/Consumption: 5V 500mA (USB)/48V DC (analog)
- Sample Rate: 192 kHz
- Bit Rate: 24bit
- Capsules: 3 Blue-proprietary 14mm condenser capsules
- Polar Patterns: Cardioid, Bidirectional, Omnidirectional, Stereo
- Frequency Response: 20Hz - 20kHz
- Sensitivity: 4.5mV/Pa (1 kHz)
- Max SPL: 120dB (THD: 0.5% 1kHz)Headphone Amplifier
- Impedance: >16 ohms
- Power Output (RMS): 130 mW
- THD: 0.009%
- Frequency Response: 15 Hz - 22 kHz
- Signal to Noise: 114dBSpecifications
- Dimensions (extended in stand): 4.72"(12cm) x 4.92"(12.5cm) x 11.61"(29.5cm)
- Weight (microphone): 1.2 lbs (.55 kg)
- Weight (stand): 2.2 lbs (1 kg)
- Included Cable: 12" Y-Cable and 3M USB cable
- Optional: BLUE Ringer shockmountBLUE Yeti Pro:
- PC: Windows 7, Windows Vista, XP Home Edition or XP Professional
USB 2.0 High Speed; 256 MB RAM (minimum)
- Macintosh: Mac OSX (10.6.4 or higher)
USB 2.0 High Speed; 256 MB RAM (minimum)
- Dimensions and Weight in Packaging
- Base Item
- Shipping Weight: 4 lbs
If you have additional warranty questions, please contact the manufacturer at 818-879-5200
Product DescriptionThe BLUE Yeti Pro is the world's first USB microphone combining 24 bit/192 kHz digital recording resolution with analog XLR output. Featuring three custom condenser capsules and four different pattern settings, the BLUE Yeti Pro can capture digital audio with up to four times the clarity found on CDs. Plus, the BLUE Yeti Pro features a cutting-edge A-D converter chip and separate analog circuit path for use with professional studio mixers and preamps. You also get a built-in headphone amplifier for zero-latency monitoring, and direct controls for headphone volume, pattern selection, mute, and microphone gain. So whether you record at home, in a studio (or in the Himalayas), the Yeti Pro is your ultimate sound solution.
The legend of the Yeti continues with the most advanced and versatile multi-pattern USB microphone roaming the wild today. The BLUE Yeti Pro features tools and recording capabilities usually requiring multiple microphones and devices, all with the simplicity of a plug 'n play USB microphone.
Ringer and computer NOT included.