Audio-Technica ATOC9/III MicroCoil Phono Cartridge

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
Audio-Technica ATOC9/III MicroCoil Phono Cartridge, Main
Audio-Technica ATOC9/III MicroCoil Phono Cartridge, Main
Composed with a solid boron cantilever for accurate signal transfer and a "VC mold" design for stability, the AT-OC9/III is an audiophile-grade cartridge.

Audio-Technica's AT-OC9/III MicroCoil Cartridge features a special line contact stylus embedded into a low-profile solid boron cantilever, ensuring the music signals read by the tip of the stylus are transmitted reliably to the coils. The cartridge's "VC mold" design ensures stability and rigidity while the dual moving coil offers excellent stereo separation and improved frequency response for long-lasting performance. The use of PCOCC wire (Pure Copper by Ohno Continuous Casting), a special copper with virtually no transverse crystal barriers to impede signal transmission, perfects the performance of the advanced dual coil design.

- Frequency Response: 15-50,000 Hz
- Channel Separation: 30 dB (at 1 kHz)
- Vertical Tracking Force: 1.88-2.2 grams (standard: 2.0 grams)
- Recommended Load Impedance: Min. 100 ohms (when head amplifier is connected)
- Output: 0.4 mV (at 1 kHz, 5 cm/sec)
- Channel Balance: 0.5 dB (at 1 kHz)
- Stylus Shape: Line contact
- Cantilever: 0.26 mm diameter solid boron
- Mount: Half-inch
- Note: moving coil cartridges require receivers or preamps with compatible inputs; their stylus assemblies are not field-replaceable.

For support or warranty questions, please contact the manufacturer:
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer