Audio-Technica AT2041 Studio Microphone Package
Start recording with this cost-effective mic pack from Audio-Technica. You get an AT2020 large-diaphragm condenser, plus an AT2021 small-diaphragm condenser.
$179.00
- No Credit Check6 payments of$29.83/mo
Audio Technica AT4040SP Studio Pack
No longer available at zZounds
zZounds Gear Experts Say...
Includes Audio Technica AT4040 and AT4041 microphones.
Overview
The AT4040SP Studio Pack offers two of Audio-Technica's renowned 40 Series studio condenser microphones: the AT4040 large-diaphragm side-address condenser and the AT4041 cardioid condenser. Each microphone is transformerless, resulting in exceptional transient response and extremely clean output signals; each is engineered to meet the most critical acoustic requirements of professional recording, broadcast and live sound. A shock mount, stand clamp and windscreen are included, along with a protective wooden carrying case.
AT4040SP Studio Pack includes:
AT4040 side-address cardioid condenser microphone
AT4041 cardioid condenser microphone
AT8449 shock mount
AT8405a stand clamp
AT8159 windscreen
AT4040 Side-address cardioid condenser microphone
Technically-advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics
Externally polarized (DC bias) true condenser design
Exceptionally low noise, wide dynamic range and high-SPL capability for greatest versatility
Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity
Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards… read more
Switchable 80 Hz hi-pass filter and 10 dB pad
AT4041 Cardioid condenser microphone
Smooth, extended frequency response with a slight rise occurring in the high-frequency region
Ideal for drum overheads, acoustic guitar, piano, horns and under snare
Low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer
Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
State-of-the-art design and manufacturing techniques ensure compliance with A-T's stringent consistency and reliability standards
Switchable hi-pass filter and rugged turned-brass microphone housing
Protective wooden storage case read less
AT4040SP Studio Pack includes:
AT4040 side-address cardioid condenser microphone
AT4041 cardioid condenser microphone
AT8449 shock mount
AT8405a stand clamp
AT8159 windscreen
AT4040 Side-address cardioid condenser microphone
Technically-advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics
Externally polarized (DC bias) true condenser design
Exceptionally low noise, wide dynamic range and high-SPL capability for greatest versatility
Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity
Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards… read more
Switchable 80 Hz hi-pass filter and 10 dB pad
AT4041 Cardioid condenser microphone
Smooth, extended frequency response with a slight rise occurring in the high-frequency region
Ideal for drum overheads, acoustic guitar, piano, horns and under snare
Low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer
Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
State-of-the-art design and manufacturing techniques ensure compliance with A-T's stringent consistency and reliability standards
Switchable hi-pass filter and rugged turned-brass microphone housing
Protective wooden storage case read less
Specs
AT4040 Specs
Element: Condenser
Dynamic Range (Typical): 133 dB, 1 kHz at Max. SPL
Polar Pattern: Cardioid
Phantom Power Requirements: 48V
Frequency Response: 20 - 20,000 Hz
Switches: 10 dB pad; roll-off
Open Circuit Sensitivity: -32 dB (25.1 mV), 2 dB re 1V at 1 Pa
Low Frequency Roll-off: 80 Hz, 12 dB per octave
Impedance: 100 ohms
Weight: 12.7 oz (360 g)
Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.
Output Connector: XLRM-type
Signal to Noise Ratio: 82 dB, 1 kHz at 1 Pa
AT4041 Specs
Element: Capacitor
Dynamic Range (Typical): 121 dB, 1 kHz at Max. SPL
Polar Pattern: Cardioid
Phantom Power Requirements: 48V (+/- 4V)
Frequency Response: 20 - 20,000 Hz
Switch: Flat/roll-off
Open Circuit Sensitivity: -36 dB (15.8 mV), +/-2 dB re 1V at 1 Pa
Low-frequency Roll-off: 80 Hz, 12 dB per octave
Impedance: 100 ohms
Weight: 4.2 oz. (120 g)
Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.
Output Connector: XLRM-type
Signal To Noise Ratio: 70 dB, 1 kHz at 1 Pa
Element: Condenser
Dynamic Range (Typical): 133 dB, 1 kHz at Max. SPL
Polar Pattern: Cardioid
Phantom Power Requirements: 48V
Frequency Response: 20 - 20,000 Hz
Switches: 10 dB pad; roll-off
Open Circuit Sensitivity: -32 dB (25.1 mV), 2 dB re 1V at 1 Pa
Low Frequency Roll-off: 80 Hz, 12 dB per octave
Impedance: 100 ohms
Weight: 12.7 oz (360 g)
Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.
Output Connector: XLRM-type
Signal to Noise Ratio: 82 dB, 1 kHz at 1 Pa
AT4041 Specs
Element: Capacitor
Dynamic Range (Typical): 121 dB, 1 kHz at Max. SPL
Polar Pattern: Cardioid
Phantom Power Requirements: 48V (+/- 4V)
Frequency Response: 20 - 20,000 Hz
Switch: Flat/roll-off
Open Circuit Sensitivity: -36 dB (15.8 mV), +/-2 dB re 1V at 1 Pa
Low-frequency Roll-off: 80 Hz, 12 dB per octave
Impedance: 100 ohms
Weight: 4.2 oz. (120 g)
Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.
Output Connector: XLRM-type
Signal To Noise Ratio: 70 dB, 1 kHz at 1 Pa
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com
No longer available at zZounds
This is a carousel with product cards. Use the previous and next buttons to navigate.