Audix ADX51 Studio Condenser Instrument Microphone
Capture an acoustic guitar or the shimmer of hi-hats with the Audix ADX51. This small-diaphragm condenser mic has smooth response between 40Hz and 18kHz.
$269.00
- No Credit Check6 x$44.83
- No Credit Check4 x$67.25
Audix MB1255 MicroBoom Condenser Microphone
No longer available at zZounds
The tiny Audix MB1255 small-diaphragm condenser is a great choice for distance miking, whether you're reinforcing a choir, or recording an orchestra.
Overview
The Audix M1255B is a miniaturized condenser microphone with a fully integrated preamp and detachable cable, is designed with a very high sensitivity for distance miking. The M1255B has complete immunity from RF interference caused by cell phones and GSM devices. Applications include ceiling mount or table mount for conferencing, overhead choir miking, location recording, audience or room miking.
- Miniaturized integrated preamp circuitry
- No external power adapter needed
- 12 mm gold vapor diaphragm
- Immune to RF interference
- Extremely low noise, high sensitivity
- Acoustic instruments
- Ambient room capturing
- Symphonic area capturing
- Speech, presentation
The M1255B is available in black with a wide array of clips and accessories allowing the microphone to be used for musical instruments, overhead stage miking, podiums, conferences and presentations.
Features:
- Small, lightweight, low profile- Miniaturized integrated preamp circuitry
- No external power adapter needed
- 12 mm gold vapor diaphragm
- Immune to RF interference
- Extremely low noise, high sensitivity
Applications:
- Overhead mic for choir, group vocal- Acoustic instruments
- Ambient room capturing
- Symphonic area capturing
- Speech, presentation
The M1255B is available in black with a wide array of clips and accessories allowing the microphone to be used for musical instruments, overhead stage miking, podiums, conferences and presentations.
Specs
- Transducer Type: Condenser
- Frequency Response: 50 Hz - 19 kHz
- Polar Pattern: Cardioid
- Output Impedance: 150 ohms
- Sensitivity: 32 mV / Pa at 1k
- Signal/Noise Ratio (A-weighted) : 73 dB
- Equivalent Noise Level (A-weighted): 21 dB
- Maximum SPL at .5% THD: greater than 130 dB
- Dynamic Range: 109 dB
- Power Requirements: 18 - 52 V
- Connector: 3 pin mini-XLRm
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
- Housing /Finish: Machined brass /Powder coat
- Weight: 20 g / 0.7 ounces
- Length: 54 mm / 2.1 inches
- Frequency Response: 50 Hz - 19 kHz
- Polar Pattern: Cardioid
- Output Impedance: 150 ohms
- Sensitivity: 32 mV / Pa at 1k
- Signal/Noise Ratio (A-weighted) : 73 dB
- Equivalent Noise Level (A-weighted): 21 dB
- Maximum SPL at .5% THD: greater than 130 dB
- Dynamic Range: 109 dB
- Power Requirements: 18 - 52 V
- Connector: 3 pin mini-XLRm
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
- Housing /Finish: Machined brass /Powder coat
- Weight: 20 g / 0.7 ounces
- Length: 54 mm / 2.1 inches
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 503-682-6933 / 800-966-8261
Email: info@audixusa.com
Phone: 503-682-6933 / 800-966-8261
Email: info@audixusa.com
No longer available at zZounds
This is a carousel with product cards. Use the previous and next buttons to navigate.