AKG C 519 MicroMic Brass Microphone
No longer available at zZounds
Clip this tiny AKG mic onto the bell of a brass or wind instrument for a natural, powerful sound. It's designed to work with AKG WMS wireless bodypacks.
Overview
The C 519 gently clips onto the bell of a trumpet, saxophone, trombone, tuba, or any other wind instrument (e.g. didgeridoo), with a miniature gooseneck that makes it a snap to position. Room to move for the wind section at last!
Its tight cardioid polar pattern makes the C 519 an ideal tool for use near monitor wedges, and its flat frequency response delivers a natural, powerful, and clear sound.
- Miniature goose-neck for accurate microphone alignment
- Including wireless direct adapter for easy use with AKG pocket transmitters
- Detachable microphone cable
- Transducer shock mount for high mechanical-noise rejection
Its tight cardioid polar pattern makes the C 519 an ideal tool for use near monitor wedges, and its flat frequency response delivers a natural, powerful, and clear sound.
Use with AKG WMS Bodypack Transmitters
The C519 ML package includes a mini-XLR cable with TA3F connector for connecting to AKG WMS series bodypack transmitters. Also includes the A400 adapter plate for easy mounting onto PT40/45/450/470 wireless bodypack transmitters.Features:
- Miniature condenser clip-on microphone for wind instruments, drums, and percussion- Miniature goose-neck for accurate microphone alignment
- Including wireless direct adapter for easy use with AKG pocket transmitters
- Detachable microphone cable
- Transducer shock mount for high mechanical-noise rejection
Specs
Polar pattern
cardioid
Frequency range
60 Hz to 20 kHz
Sensitivity
5 mV/Pa (-46 dBV)
Max. SPL
130/132 dB SPL (for 1 %/3 % THD)
Equivalent noise level
31 dB(A)
Signal/noise ratio (A-weighted)
63 dB
Impedance
<= 200 ohms
Recommended load impedance
>= 2000 ohms
Current consumption
<= 2 mA
Power requirement
B 29 L battery power supply, MPA V L phantom adapter, AKG WMS bodypack transmitters
Connector
3-pin mini XLR
Cable
1.5 m (5 ft.)
Finish
matte black
Dimensions
Length: 213 mm (8.4 in.) (microphone only); max. width: 47 mm (1.9 in.)
Net weight
C 519 M: 195 g (6.9 oz.)
C 519 ML: 85 g (3 oz.)
(microphone and cable)
Shipping weight
C 519 M: 430 g (15.2 oz.)
C 519 ML: 310 g (11 oz.)
cardioid
Frequency range
60 Hz to 20 kHz
Sensitivity
5 mV/Pa (-46 dBV)
Max. SPL
130/132 dB SPL (for 1 %/3 % THD)
Equivalent noise level
31 dB(A)
Signal/noise ratio (A-weighted)
63 dB
Impedance
<= 200 ohms
Recommended load impedance
>= 2000 ohms
Current consumption
<= 2 mA
Power requirement
B 29 L battery power supply, MPA V L phantom adapter, AKG WMS bodypack transmitters
Connector
3-pin mini XLR
Cable
1.5 m (5 ft.)
Finish
matte black
Dimensions
Length: 213 mm (8.4 in.) (microphone only); max. width: 47 mm (1.9 in.)
Net weight
C 519 M: 195 g (6.9 oz.)
C 519 ML: 85 g (3 oz.)
(microphone and cable)
Shipping weight
C 519 M: 430 g (15.2 oz.)
C 519 ML: 310 g (11 oz.)
No longer available at zZounds
In most cases, a product is unavailable because it has been discontinued by the manufacturer
This is a carousel with product cards. Use the previous and next buttons to navigate.