Neutrik NC3FX Female XLR Connector (Silver Contacts)

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
Neutrik NC3FX Female XLR Connector (Silver Contacts), Main
Neutrik NC3FX Female XLR Connector (Silver Contacts), Parts
Neutrik NC3FX Female XLR Connector (Silver Contacts), Rear
Neutrik NC3FX Female XLR Connector (Silver Contacts), Main Neutrik NC3FX Female XLR Connector (Silver Contacts), Parts Neutrik NC3FX Female XLR Connector (Silver Contacts), Rear
zZounds Gear Experts Say...
Broken XLR cable? Get back to making music by attaching this easy-to-use connector with nickel housing and silver contacts to your cable.

The "industry standard" XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables.

3 pole female cable connector with Nickel housing and silver contacts.
'
Features
Rugged zinc diecast shell, long lasting and durable

Chuck type strain relief system for secure clamping of cables

Boot with rubber gland gives high protection against bending stresses

Coloured rings and boots available for coding and marking

UL recognized components

Product
Connector Type: XLR

Gender: female

Electrical
Capacitance between contacts: < 4 pF

Contact resistance: < 3 m ohms

Dielectric strength: 1,5 kVdc

Insulation resistance: > 2 G ohms (initial)

Insulation resistance: > 1 G ohms (after damp heat test)

Rated current per contact: 16 A

Rated voltage: 50 V

Mechanical
Cable O.D.: 3.5 - 8.0 mm

Insertion force: < 20 N

Withdrawal force: < 20 N

Lifetime: > 1000 mating cycles

Wire size: max. 2.5 mm(2)

Wire size: max. 14 AWG

Wiring: Solder contacts

Locking device: Latch lock

Material
Boot: Polyuretan

Bushing: Polyamide (PA 6 15% GR)

Contact plating: 2 micrometers Ag over 2 micrometers Ni

Contacts: Bronze (CuSn8)

Insert: Polyamide (PA 6.6 30 % GR)

Locking element: St3K32 (latch) / Ck 67 (spring)

Shell: Zinc diecast (ZnAl4Cu1)

Shell plating: Nickel

Strain relief: Polyacetal (POM)

Environmental
Approvals: UL

Flammability: UL 94 HB

Standard compliance: IEC 61076-2-103

Protection class: IP 40

Solderability: Complies with IEC 68-2-20

Temperature range: -30 degrees C to +80 degrees C

For support or warranty questions, please contact the manufacturer:
Phone: 732-901-9488
Product Information

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer