The Tube MP Project Series is a professional quality audio interface that lets you connect microphone, instrument, and line level signals to a mixer or other audio input. This hybrid design is the latest in a long line of ART tube preamps. They took the legendary Tube MP series and updated every aspect of the design, inside and out, while still maintaining a compact, reliable, and cost effective product. From the new all-aluminum stackable chassis to the precision LED level metering circuitry, they have improved virtually every aspect of the already successful Tube MP series. With up to 70dB of clean musical gain and high output signal drive capability the cold digital world will melt with your mixes! Charge up your creativity with the Tube MP Project Series!
Features:
Extremely Low Noise Discrete Front End
Up to 70dB of Clean, 'Musical' Gain
High Output Signal Drive Capability
Fast FET Limiter to Prevent Overload
Switch Selectable Input Impedance
Precision LED Metering
Built-in Low Noise Phantom Power Supply
Compact, Stackable all Aluminum Chassis
XLR and 1/4 in. Inputs and Outputs
Phase Invert Switch
High Cut Filter Switch
Variable Input and Output Controls
Technical Info
Frequency Response: 10Hz - 40KHz, +/-1 dB (typical)
Dynamic Range: >100dB (20Hz to 20KHz)
THD: <0.05% (typical)
CMRR: >60dB (typical)
EIN: <-130dB (XLR to XLR A-weighted)
Maximum Input Level: +17dBu (¼ in.), +16dBu (XLR)
Maximum Output Level: +20dBu (¼ in.), +26dBu (XLR)
Input Connections: 1/4 in. TRS unbalanced (1meg Ohm)
XLR female balanced
Output Connection: 1/4 in. TRS unbalanced (600 Ohm)
XLR male balanced, (<300 Ohm)
Maximum Gain: 70dB (XLR - XLR), +50dB (1/4 in.- XLR)
Input Gain Pad: Switchable, 20dB
XLR Input Impedance: Switchable, 4.7k Ohms / 600 Ohms
Low Cut Filter: Switchable, -3dB @ 40Hz
Output Phase: Switchable, Normal/Invert
Output Limiter Type: Switchable, Fast & Musical FET limiter, >20dB limit range
Phantom Power: Switchable, +48V DC, filtered, current limited
Signal Metering: Precise LED array with a fast attack and moderate release
Tube Type: 12AX7A hand selected
Chassis Type: Aluminum Anodized with integral/stackable rubber sides
Power Requirements: 10Volts AC @ 700mA (typical)
Dimensions: 1.75 in. H x 5.9 in. W x 6.5 in. D (44.5mm x 150mm x 165mm)
Weight: 2.5 lbs. (1.14 kg)
