Audio Technica AT4040SP Studio Pack

No longer available at zZounds
zZounds Gear Experts Say...
Includes Audio Technica AT4040 and AT4041 microphones.

The AT4040SP Studio Pack offers two of Audio-Technica's renowned 40 Series studio condenser microphones: the AT4040 large-diaphragm side-address condenser and the AT4041 cardioid condenser. Each microphone is transformerless, resulting in exceptional transient response and extremely clean output signals; each is engineered to meet the most critical acoustic requirements of professional recording, broadcast and live sound. A shock mount, stand clamp and windscreen are included, along with a protective wooden carrying case.

AT4040SP Studio Pack includes:
AT4040 side-address cardioid condenser microphone

AT4041 cardioid condenser microphone

AT8449 shock mount

AT8405a stand clamp

AT8159 windscreen

AT4040 Side-address cardioid condenser microphone
Technically-advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics

Externally polarized (DC bias) true condenser design

Exceptionally low noise, wide dynamic range and high-SPL capability for greatest versatility

Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients

Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity

Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections

State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards read more

Switchable 80 Hz hi-pass filter and 10 dB pad

AT4041 Cardioid condenser microphone
Smooth, extended frequency response with a slight rise occurring in the high-frequency region

Ideal for drum overheads, acoustic guitar, piano, horns and under snare

Low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer

Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients

State-of-the-art design and manufacturing techniques ensure compliance with A-T's stringent consistency and reliability standards

Switchable hi-pass filter and rugged turned-brass microphone housing

Protective wooden storage case
read less

AT4040 Specs
Element: Condenser

Dynamic Range (Typical): 133 dB, 1 kHz at Max. SPL

Polar Pattern: Cardioid

Phantom Power Requirements: 48V

Frequency Response: 20 - 20,000 Hz

Switches: 10 dB pad; roll-off

Open Circuit Sensitivity: -32 dB (25.1 mV), 2 dB re 1V at 1 Pa

Low Frequency Roll-off: 80 Hz, 12 dB per octave

Impedance: 100 ohms

Weight: 12.7 oz (360 g)

Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.

Output Connector: XLRM-type

Signal to Noise Ratio: 82 dB, 1 kHz at 1 Pa

AT4041 Specs
Element: Capacitor

Dynamic Range (Typical): 121 dB, 1 kHz at Max. SPL

Polar Pattern: Cardioid

Phantom Power Requirements: 48V (+/- 4V)

Frequency Response: 20 - 20,000 Hz

Switch: Flat/roll-off

Open Circuit Sensitivity: -36 dB (15.8 mV), +/-2 dB re 1V at 1 Pa

Low-frequency Roll-off: 80 Hz, 12 dB per octave

Impedance: 100 ohms

Weight: 4.2 oz. (120 g)

Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.

Output Connector: XLRM-type

Signal To Noise Ratio: 70 dB, 1 kHz at 1 Pa

For support or warranty questions, please contact the manufacturer:
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com