SE Electronics SE3 Condenser Microphone

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
SE Electronics SE3 Condenser Microphone, Main
SE Electronics SE3 Condenser Microphone, In Box
SE Electronics SE3 Condenser Microphone, On Stand
SE Electronics SE3 Condenser Microphone, Pair
SE Electronics SE3 Condenser Microphone, Main
SE Electronics SE3 Condenser Microphone, In Box
SE Electronics SE3 Condenser Microphone, On Stand
SE Electronics SE3 Condenser Microphone, Pair
SE Electronics SE3 Condenser Microphone, Main
SE Electronics SE3 Condenser Microphone, In Box
SE Electronics SE3 Condenser Microphone, On Stand
SE Electronics SE3 Condenser Microphone, Pair
SE Electronics SE3 Condenser Microphone, Main SE Electronics SE3 Condenser Microphone, In Box SE Electronics SE3 Condenser Microphone, On Stand SE Electronics SE3 Condenser Microphone, Pair SE Electronics SE3 Condenser Microphone, Main SE Electronics SE3 Condenser Microphone, In Box SE Electronics SE3 Condenser Microphone, On Stand SE Electronics SE3 Condenser Microphone, Pair SE Electronics SE3 Condenser Microphone, Main SE Electronics SE3 Condenser Microphone, In Box SE Electronics SE3 Condenser Microphone, On Stand SE Electronics SE3 Condenser Microphone, Pair
zZounds Gear Experts Say...
Cardioid, low cut filter, and 10dB pad.

The SE3 is SE Electronic's flagship "pencil" microphone. It is a 48V phantom powered Class A FET true condenser microphone with fixed cardioid pick up pattern, and sports both low cut filter and 10dB pad switches. Housed in an elegantly finished new body design it comes with robust shockmount and packaged in a deluxe travel case. This is one of their most popular microphones and a must for every engineer's toolbox.

Frequency response: 20Hz-20kHz

Sensitivity: 10mV/Pa - 40 +/- 2dB(0dB=1V/Pa 1000Hz)

Polar pattern: cardioid

Impedance: < 200 ohms

Equivalent noise level: 17dB(A weighted)

Max SPL for 0.5% THD@1000Hz: 135dB

Power requirement: phantom power 48V±4V

Connector: 3-pin

XLR size: 27mm x 177mm

For support or warranty questions, please contact the manufacturer:
Phone: 512-847-5696
Web: https://seelectronics.com/contact/support-service/

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer