Sennheiser AM2 Front Panel Remote Antenna Kit
zZounds Gear Experts Say...
Rack your Sennheiser Evolution G2 wireless system with the GA2 rack mount kit -- then run your antennas through the front panel with this set of BNC cables.
Overview
This antenna front mount kit is used for connecting the antennas of Sennheiser EM 300 G2, EM 500 G2 receivers, or SR 300 IEM G2 transmitters to the front of the rack.
Add this set of BNC cables to the Sennheiser GA2 Evolution series rack mount kit, to connect the antenna to the front of the rack mount kit instead of the rear of the receiver.
- 2 x 50-ohm BNC cables
- Mounting accessories
Add this set of BNC cables to the Sennheiser GA2 Evolution series rack mount kit, to connect the antenna to the front of the rack mount kit instead of the rear of the receiver.
What's in the box?
- 2 x 50-ohm BNC cables
- Mounting accessories
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.
Specs
- Frequency Range: 470-865 MHz (varies by system compatibility)
- Impedance: 50 ohm
- Connector Type: BNC
- Number of Inputs/Outputs: 2 cables
NOTE: None of the wireless systems we carry are capable of violating the FCC guidelines stated above. We are presenting this information as a matter of legally required disclosure.
- Impedance: 50 ohm
- Connector Type: BNC
- Number of Inputs/Outputs: 2 cables
Dimensions and Weight in Packaging
Base Item
- Shipping Weight: 0.24 lbs
- Shipping Dimensions: 5 x 4 x 1 in
- Manufacturer Part Number (MPN): AM 2
Consumer Alert
Most users do not need a license to operate this wireless system. Nevertheless, operating this system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's website at www.fcc.gov/cgb/wirelessmicrophonesNOTE: None of the wireless systems we carry are capable of violating the FCC guidelines stated above. We are presenting this information as a matter of legally required disclosure.
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 877-736-6434
Email: support@sennheiser.com
Web: https://en-us.sennheiser.com/service-support
Phone: 877-736-6434
Email: support@sennheiser.com
Web: https://en-us.sennheiser.com/service-support
Reviews
Reviewers gave this product an overall rating of 3.5 out of 5 stars.
(2 ratings)
Submitted September 27, 2011 by a customer from gmail.com
Sennheiser AM2 Remote Customer Review
Verified Purchaser
zZounds has verified that this reviewer purchased this specific product from us.
Ease of Use
You have to look at a picture online of the finished product...did not come with instructions....not hard, just a little time consuming.
Quality
plates and brackets are well made. Be careful with the screws, the heads are a little soft.
Manufacturer Support
I had questions about the wireless system this bracket is for...very helpful and knowledgeable folks at Sennheiser, plus they're in CT...they speak English!
Musical Background:
Active Musician
Musical Style:
Rock/Blues/Funk
1 of 4 people (25%) people found this review helpful. Did you?
Thanks for your opinion!
New
$55.00
FREE
-Day
Shipping!
Get it
for
Get it
(or get it
with an order of
),
if you order within
Shipping to
This is a carousel with product cards. Use the previous and next buttons to navigate.