Marshall MG Guitar Amplifier Half Stack with MG100HFX Head and MG4X12A Cabinet

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
Marshall MG Guitar Amplifier Half Stack with MG100HFX Head and MG4X12A Cabinet, Main
Marshall MG Guitar Amplifier Half Stack with MG100HFX Head and MG4X12A Cabinet, Main
Plug into a Marshall half stack without starving as a result. This angled half stack still offers that legendary Marshall tone, just at a more affordable price.

To paraphrase Dee Snyder, "You want to rock, you want. . . to. . . rock," and there's just no better way to rock than with an electric guitar and a Marshall Half Stack. Of course, most of us blue-collar rockers can't sink thousands of dollars into a JVM head and 1960 4x12 slant cab, but that doesn't mean we can't still rock that indelible Marshall tone! Say hello to the Marshall MG Guitar Amplifier Half Stack.

The Marshall MG Half Stack pairs the blistering MG100HFX 100-watt head with the punchy MG4X12A cabinet for a guitar half stack that's all rock, and at a rock-bottom price. It's all the Marshall power you'll need to make audiences grovel at your feet.

The Fire-Breathing MG100HFX Head


If you really want to be heard over a rollicking rock band, you're going to need all 100 of the watts that the MG1000HFX has at its disposal. Never get drowned out by a crash-happy drummer or ham-fisted bassist again. Of course, being a Marshall, the MG head isn't just about volume, it's also about tone, and the MG truly delivers on the Marshall legacy. And talk about versatility: you've got an impressive four channels to choose from, including clean, crunch and two--yes, TWO--overdrive channels. Instantly switch between pristine clean, dirty rhythm chunk, gut-kicking power chords, and absolutely searing lead tones, all in the same amp. The MG1000HFX also features a full selection of digital effects built-in, including Reverb, Delay, Chorus, Phaser, and Flanger. You won't be wanting for… read more stompbox effects for a long time! When you do add external effects, however, the MG100HFX's professional effects loop helps you preserve the fundamental tone of the amp, and trust us, you won't want to spoil that gorgeous tone one bit.

The Earth-Shaking MG4X12A Speaker Cabinet


There's no better way to give voice to 100 watts of Marshall tone than with a genuine Marshall 4x12 cabinet, and that's exactly what you get with the MG Half Stack. The MG4X12A sports four 12-inch special design Marshall/Celestion drivers for extended low-end response, aggressive mid range and singing highs that never sound brittle. The speakers are mounted in a rock-solid cabinet that both adds to the speakers' natural presence and protects them from the abuses of the road. You're gonna absolutely love the sound this Half Stack churns out, and you'll happy to know it's been built to last you for years to come.

Easily Expands To Become A Full Stack


When you feel the need to upgrade to that most coveted of rock totems, the Marshall Full Stack, all you'll need to do is add a second MG4X12 speaker cabinet to this package, and you'll be poised for world domination. The MG1000HFX sports a secondary speaker output, so the MG Half Stack represents the perfect first step towards reaching the glorious heights of rock excess. Choose a straight cabinet for the bottom (the MG4X12B) to complement the angled cab that comes with the MG Half Stack package for the same classic look that was the choice of the early gods of rock.

You've been dreaming about it for long enough. Grab yourself a Marshall MG Half Stack and wield the raw rock power that is genuine Marshall tone! read less

Marshall MG100HFX Head
Power: 100W (RMS)

Channels: 4

Dimensions (WxHxD): 23.26 x 9.8 x 10.83 inches (591 x 249 x 275 mm)

Weight: 25.13 lbs (11.4 kg)

Marshall MG412A Angle Cabinet
Speaker Configuration: Angled 4x12 inch

Power Handling: 120 watts

Impedance: 8 ohms

Dimensions: 27.24 x 26.57 x 14.17 inches (692 x 675 x 360 mm)

Weight: 52.91 lbs (24 kg)

For support or warranty questions, please contact the manufacturer:
Phone: 800-877-6863
User Manual

Marshall MG Half Stack with MG100HFX

Marshall MG100HFX Angled Half Stack; A soul pounding 100 watts of power! This half stack is nothing to mess with, perfect for medium to larger gigs or just to get the edge over other guitarists, the 100 watt MG100HFX head gives you 4 channels; Clean, Crunch, and 2 Overdrive channels and operates in 2 modes, Preset and Manual. It comes with an incredible MG series 4x12 inch angled cabinet so you can rock through the night with an incredible setup.

The MG100HFX amplifier head has two external speaker sockets, so purchase a straight cab in the future and rock a powerful MG full stack.

Features
100 watt output

4 storable channels

Digital effects including Delay, Chorus, Phaser or Flanger

Digital reverb

Power amp damping

MP3/Line input

Emulated Line/Headphone output

External Effects Loop

MG footcontroller compatibility

Reverb & FX
The MG100HFX amplifier provides three simultaneous effects, Reverb, Delay and one of three Modulation effects (Chorus, Phaser, or Flanger).

Tap Tempo
Use tap tempo to set your delay times as easily as tapping your foot. Tap Tempo switch is used for the Delay effect only.

MP3/Line In
Jam along to your favorite bands or personal recordings by connecting to your MP3 or CD player to this convenient 1/8 inch input jack.

Headphones & Line Out
The Headphone/Line out provides speaker emulation, so you can hear your guitar like its being blasted through powerful speakers or record direct to a source without using a microphone.

Damping
Make it sound like your using 2 completely different amplifiers. When Damping is Off the power amp response resembles the feel of a classic power amp with emphasized middle and limited bass and treble. Switching Damping On will boost the speaker resonances both in the bass and high frequency ranges.

FX Loop
The FX Return socket on the rear panel is used to connect the your favorite external effects pedals or processor. The FX loop is series and set at instrument level so both guitar FX or professional units can be connected.

Reviewers gave this product an overall rating of 5 out of 5 stars. (17 ratings)
Submitted July 3, 2009 by a customer from hotmail.com

"i love this amp"

Overall: 5 out of 5 stars
(see rating details)
Verified Customer zZounds has verified that this reviewer made a purchase from us.
from over 40 yrs of owning amps i believe i will own this amp forever. i was considering the kirk hammet amp for a 100.00$ less but what guitarist doesn't want a marshall ?
Sound
this amp is perfect for beginners or anyone who wants perfect factory presets. 4 channels perfectly preset by marshall pro's for incredible sounds from clean to down right raunchy. you can switch to manual to customize your own unique sound too.
Features
comes complete for a fast setup. cables and footswitch. very ez to use and understand.
Ease of Use
the manual answered all of my questions
Quality
the whole unit is tight and tough. top quality
Value
a very good value
Manufacturer Support
the order was placed and delivered as fast as possible
The Wow Factor
the look of the amp and logo are very sexy and tough

Musical Background:

hobbyist

Musical Style:

heavy rock
57 of 59 people (97%) people found this review helpful. Did you?
Thanks for your opinion!
Rate and Review this Product
Read more reviews

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer