Behringer GX210 Ultratwin Guitar Amplifier with DFX
No longer available at zZounds


zZounds Gear Experts Say...
2x30 watts RMS. 2 10 in. speakers.
Overview
If you're looking for a twin combo dedicated to crystal-clear to mildly distorted sounds with plenty of power, look no further. Modeled after the American tradition, the Ultratwins combine the tonal qualities of legendary twin amps with revolutionary flexibility of tone and I/O options including MIDI, plus built-in 24-bit stereo digital effects. The GX210 features a 2 x 30-Watt stereo amp, 2 original Jensen¬ 10 in. speakers and separate volume and effects settings for each channel with the same 3-band EQ in the master section. Both Ultratwins feature an onboard stereo digital effects unit with 31 awesome algorithms and 99 presets, as well as our innovative Morphing knob. And, like all Behringer amps, both are ruggedly built for years of reliable service.
Features
2 x 30 watts RMS Virtube¬ amp
2 original 35-watt 10 in. Jensen¬ speakers
2 channels with separate volume and FX
Morphing knob for effective sound shaping
Digital stereo FX unit with 24-bit converters
Insert, stereo aux in and line out, phones, MIDI
Features
2 x 30 watts RMS Virtube¬ amp
2 original 35-watt 10 in. Jensen¬ speakers
2 channels with separate volume and FX
Morphing knob for effective sound shaping
Digital stereo FX unit with 24-bit converters
Insert, stereo aux in and line out, phones, MIDI
Specs
Specifications
Audio Inputs:
Connector: 1/4 in. mono jack
Type: RF filtered input
Guitar input impedance: Approx. 1 MOhm unbalanced
Insert return impedance: Approx. 50 kOhm unbalanced
Aux input impedance: Approx. 10 kOhm unbalanced
Slave input impedance: Approx. 20 kOhm unbalanced
Tape input
Connector: RCA
Impedance: Approx. 10 kOhm unbalanced
Audio Outputs:
Connector: 1/4 in. mono jack
Type: Line level output
Insert send impedance: Approx. 1 kOhm unbalanced
Line output
Impedance: Approx. 100 Ohms unbalanced
Maximum output level: +12 dBu unbalanced
Tape output:
Connector: RCA
Impedance: Approx. 100 Ohms unbalanced
Maximum output level: +12 dBu unbalanced
Power Amp Specifications:
Power amp output: 2 x 30 Watts RMS @ 5 % THD + N into 8 Ohms
MIDI Interface Type: 5-pin-DIN-socket, MIDI IN
Digital Processing:
Converters: 24-bit sigma-delta, 64/128-times oversampling
Sampling rate: 46.875 kHz
Display: Type: 2-digit numeric LED-display
Loudspeakers: Type: 2 x 10 in. heavy duty loudspeaker, model JENSEN JCH10/35
Impedance: 8 Ohms
Power handling: 35 Watts
Power Supply:
Mains voltages: USA/Canada 120 V ~
Power consumption: Approx. 30 Watts min. / approx. 110 Watts max.
Fuse: 100 - 120 V ~ : T 2.5 A H
Mains connection: Standard IEC receptacle
Dimensions (H x W x D): Approx. 17.72 x 23.53 x 9.84 in. (450 x 597.53 x 250 mm)
Weight: Approx. 16.0 kg
Audio Inputs:
Connector: 1/4 in. mono jack
Type: RF filtered input
Guitar input impedance: Approx. 1 MOhm unbalanced
Insert return impedance: Approx. 50 kOhm unbalanced
Aux input impedance: Approx. 10 kOhm unbalanced
Slave input impedance: Approx. 20 kOhm unbalanced
Tape input
Connector: RCA
Impedance: Approx. 10 kOhm unbalanced
Audio Outputs:
Connector: 1/4 in. mono jack
Type: Line level output
Insert send impedance: Approx. 1 kOhm unbalanced
Line output
Impedance: Approx. 100 Ohms unbalanced
Maximum output level: +12 dBu unbalanced
Tape output:
Connector: RCA
Impedance: Approx. 100 Ohms unbalanced
Maximum output level: +12 dBu unbalanced
Power Amp Specifications:
Power amp output: 2 x 30 Watts RMS @ 5 % THD + N into 8 Ohms
MIDI Interface Type: 5-pin-DIN-socket, MIDI IN
Digital Processing:
Converters: 24-bit sigma-delta, 64/128-times oversampling
Sampling rate: 46.875 kHz
Display: Type: 2-digit numeric LED-display
Loudspeakers: Type: 2 x 10 in. heavy duty loudspeaker, model JENSEN JCH10/35
Impedance: 8 Ohms
Power handling: 35 Watts
Power Supply:
Mains voltages: USA/Canada 120 V ~
Power consumption: Approx. 30 Watts min. / approx. 110 Watts max.
Fuse: 100 - 120 V ~ : T 2.5 A H
Mains connection: Standard IEC receptacle
Dimensions (H x W x D): Approx. 17.72 x 23.53 x 9.84 in. (450 x 597.53 x 250 mm)
Weight: Approx. 16.0 kg
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Web: https://www.behringer.com/service.html
Web: https://www.behringer.com/service.html
Reviews
Reviewers gave this product an overall rating of 3.5 out of 5 stars.
(118 ratings)
Submitted July 26, 2013 by Peter v in clermont, FL
"GX210"
Verified Purchaser
zZounds has verified that this reviewer purchased this specific product from us.
I own a lot of guitar ampsFender super reverb, Blues Deluxe, Hotrod deluxe III, Bassman ,Ampeq S77, Engl E101 and Behringer GX210, GX212 and GMX212I bought the GX210 in 2006 new, for $195.- together with the FCB1010 MIDI controller for $129.-I play Jazz, blues and rock and I own a fast spectrum of Gibson,Fender, Gretsch, Rickenbacker and Epiphone guitars.I am using a spectrum of clean to high gain sounds.And I found that for general use in small clubs the GX210 functions absolutely great. I get regularly compliments for my sound And when I tell that I use a $195.- solid state amp, the comment is regularly that this is the best sounding solid state amp they ever heard.Sofar this amp has been a blast and it's weight is about half of that of a Fender Blues Deluxe while just as powerfull.I decided In case I needed a backup, to buy a second one. Unfortunately the GX210 was replaced by the new GMX210. Same speakers, same poweramp, A similar but different effects processor, and a new modeling preamp,with added high gain and modelling functions. How hard I tried, I have not jet got the sounds that I like so much from the older GX210. But when I need the real high gain power it is no match for my Engl E101. despite the effects processor.What I actually like in the GMX210 is the build-in tuner, I wish that feature was build in the older GX210 , but you can't have every thing Still wanting a suitable backup for my good old GX210, A few month ago I bought the bigger brother the GX212.This…
read more
amp has double the power with 12 inch Jensen Chicago speakers and a expanded preamp. Clean this amp sounds incredible but as soon as I use the gain channel it does not have the finesse of the little brother it sounds too much as a transistor amp,. Despite the separate tone control and the morphing filter I can not get that rough edgy transistor sound out of the distortion. This could be due to the speakers or the poweramp or a combination of these factors But it is a great amp for my Danelectro Baritone.My favorite FX presets on The GX2104 reverb, 18 Whah + FBC101, 24 stereo delay, 66 stereo tremolo with delayPro'sGreat sound , light weight and reliable Cons,The plastic shafts of the Alps pots and encoders snap off easily and it is very hard to find replacements or have it repairedIf you manage to blow up The Jensen Chicago speakers there is no way to have them factory spec reconed, they are different from the reproduction Jensen speakers.and it seems that original recone materials for these speakers is not available. I found that it is probably easier to replace the faulty speaker with the closest replacement the Jensen MOD series. PvdS I
Musical Background:
45 year profesional read less
Musical Background:
45 year profesional read less
13 of 13 people (100%) people found this review helpful. Did you?
Thanks for your opinion!
No longer available at zZounds
In most cases, a product is unavailable because it has been discontinued by the manufacturer
This is a carousel with product cards. Use the previous and next buttons to navigate.