Shure GLXD14R/85 Wireless Lavalier Microphone System

No longer available at zZounds
Ideal for spoken word, this GLX-D set includes Shure's WL185 cardioid lav mic, bodypack transmitter, rechargeable lithium-ion battery and rackmount receiver.

The Shure GLXD14R/85 Wireless Lavalier Microphone System is part of the GLX-D Advanced wireless systems family. The GLXD14R/85 provides intelligent rechargeability, robust RF performance, automatic frequency management and increased channel count with exceptional digital audio clarity and seamless operation. The premium WL185 lavalier microphone offers discreet placement for presentations and other spoken word applications. For use with GLX-D Advanced Frequency Managers (UA846Z2).

Included with Shure GLXD14R/85 System

- Rack mount receiver
- GLXD1 bodypack transmitter
- WL185 cardioid condenser microphone with windscreen and collar clip
- SB902 rechargeable lithium-ion battery
- USB charge cable
- 2 detachable antennas
- Rack mount hardware
- User guide.

- Compatibility: Operate up to 9 compatible systems in typical setting, up to 11 maximum under ideal conditions

- System Operating Range:
-- Indoors: Up to 100 feet (30 m) typical, with a maximum of 200 feet (60 m) under ideal conditions
-- Outdoors: Up to 65 feet (20 m) typical, with a maximum of 165 feet (50 m) under ideal conditions
- Transmit Mode: Shure Proprietary Digital
- Audio Frequency Response: 20 Hz - 20 kHz Note: Dependent on microphone type
- Dynamic Range: 120 dB, A-weighted
-- Latency Groups 1 and A: 40 ms
-- Groups 2, 3, 4 and B: 73 ms
- RF Sensitivity: -88 dBm, typical
- Total Harmonic Distortion: 02%, typical
- RF Output Power: 10 mW EIRP max
- Operating Temperature Range: -18 degrees C (0 degrees F) to 57 degrees C (135 degrees F) Note: Battery characteristics may limit this range
- Storage Temperature Range: -29 degrees C (-20 degrees F) to 74 degrees C (165 degrees F)
- Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 1/4-inch output
- Battery Life: Up to 16 hours
- NOTE: All Specifications are subject to change Performance may vary depending on country regulations and operating environment

GLXD4R Rack Mount Receiver
- Dimensions 42 x 197 x 163 mm (17 x 78 x 64 in) H x W x D
- Weight: 9072 g (32 oz) without batteries
- Housing: Steel
- Power Requirements: 14 to 18 VDC (tip positive with respect to ring), 550 mA
- Spurious Rejection: >35 dB, typical
- Gain Adjustment Range: -18 to 42 dB in 1 dB steps
- Phantom Power Protection: Yes
- Audio Output:
-- Configuration XLR Output Balanced: 635 mm (1/4") output Impedance balanced
-- Impedance XLR Output 100 O: 635 mm (1/4") output 100 O (50 O, Unbalanced)
-- Full-Scale Output XLR LINE setting= +18 dBV, MIC setting= -12 dBV: 635 mm (1/4") +12 dBV
-- Pin Assignments: XLR Output 1=ground, 2=hot, 3=cold; 635 mm (1/4") connector Tip=audio, Ring=no audio, Sleeve=ground
- Mic/Line Switch: 30 dB Pad
- Receiver: Antenna Input
- Impedance: 50 O
- Antenna: Type 1/2 Wave Sleeve Dipole
- Maximum Input Level: -20 dBm

GLXD1 Bodypack Transmitter
- Dimensions: 904 x 645 x 229 mm (356 x 254 x 090 in), H x W x D (without antenna)
- Power Requirements: 37 V Rechargeable Li-Ion
- Housing: Cast Metal, Black Powdercoat
- Input Impedance: 900 kO
- RF Output Power: 10 mW EIRP max
- Transmitter: Input
- Connector: 4-Pin male mini connector (TA4M)
- Configuration: Unbalanced
- Maximum Input Level: (1 kHz at 1% THD) -84 dBV (75 Vp-p)
- Antenna Type: Internal Monopole
- Pin Assignments: TA4M
-- 1: Ground (cable shield)
-- 2: + 5 V Bias
-- 3: Audio
-- 4: Tied through active load to ground (On instrument adapter cable, pin 4 floats)

For support or warranty questions, please contact the manufacturer:
Phone: 800-516-2525
Email: service@shure.com