EM 100 G4 Specifications
- Frequency Range: 470 - 516 MHz
- Receiving Frequencies:
- Max 1680 receiving frequencies, adjustable in 25 kHz steps
- 20 frequency banks, each with up to 12 factory-preset channels, no intermodulation
- 1 frequency bank with up to 12 programmable channels
- Switching Bandwidth: Up to 42 MHz
- Nominal/Peak Deviation: +/-24 kHz / +/-48 kHz
- Receiver Principle: True diversity
- Sensitivity: (with HDX, Peak Deviation) < 25 uV for 52 dBA eff S/N
- Adjacent Channel Selection: Typically = 65 dB
- Intermodulation Attenuation: Typically = 65 dB
- Blocking: = 70 dB
- Squelch:
- Low: 5 dB uV
- Middle: 15 dB uV
- High: 25 dB uV
- Pilot tone: Squelch (Can be switched off)
- Antenna Inputs: 2 BNC sockets
- Compander System: Sennheiser HDX
- EQ Presets (switchable, act on line and monitor outputs):
- Preset 1: Flat
- Preset 2: Low Cut (-3 dB at 180 Hz)
- Preset 3: Low Cut/High Boost (-3 dB at 180 Hz,+6 dB at 10 kHz)
- Preset 4: High Boost (+6 dB at 10 kHz)
- Signal-to-noise ratio (1 mV,peak deviation): = 110 dBA
- Total harmonic distortion (THD): = 09%
- AF output voltage (at peak deviation, 1 kHz AF):
- 63 mm jack socket (unbalanced): +12 dBu
- XLR socket (balanced): +18 dBu
- Setting range AF Out: 48 dB (3 dB steps)
- Temperature range: -10C to +55C
- Power supply: 12 V DC, 300 mA
- Dimensions: Approx 190 x 212 x 43 mm
- Weight: Approx 980 g
- Connections:
- DC IN 12V/300mA DC IN 12V/300mA
- AF OUT
- BAL/UNBAL
- DATA
- DATA
- ANT II
- ANT I
- RF IN
- RF IN

SKM 100 G4-S Specifications
- Frequency Range: 470 - 516 MHz
- Transmission Frequencies:
- Max 1680 receiving frequencies, adjustable in 25 kHz steps
- 20 frequency banks, each with up to 12 factory-preset channels, no intermodulation
- 1 frequency bank with up to 12 programmable channels
- Switching Bandwidth: up to 42 MHz
- Nominal/Peak Deviation: +/-24 kHz / +/-48 kHz
- Frequency Stability: = +/-15 ppm
- RF Output Power at 50 O: Max 30 mW
- Pilot Tone: Squelch (Can be switched off)
- Compander System: Sennheiser HDX
- AF Frequency Response: 80 - 18,000 Hz
- Signal-to-Noise Ratio: (1 mV, peak deviation) = 110 dBA
- Total Harmonic Distortion (THD): = 09 %
- Max Input Voltage: 3 Veff
- Input Impedance: 40 kO
- Input Capacitance: Switchable
- Setting Range for Input Sensitivity: 48 dB, adjustable in 6 dB steps
- Temperature Range: -10C to +55C
- Power Supply: 2 AA batteries, 15 V or BA 2015 accupack
- Nominal Voltage: 3 V battery / 24 V rechargeable battery
- Current Consumption at Nominal Voltage: typ 180 mA with transmitter switched off: = 25 uA
- Operating Time: Typically 8 h
- Dimensions: Approx 50 x 265 mm
- Weight (incl batteries): approx 450 g

Dimensions and Weight in Packaging

Band A, Bundle with Levy's Bodypack Holder

Shipping Weight: 6.14 lbs

Band A1, Bundle with Levy's Bodypack Holder

Shipping Weight: 6.14 lbs

Band A (516-558 MHz)

Shipping Weight: 6 lbs

Shipping Dimensions: 16 x 14 x 3 in

Manufacturer Part Number (MPN): 509649

Band A1 (470-516 MHz)

Shipping Weight: 6 lbs

Shipping Dimensions: 16 x 14 x 3 in

Manufacturer Part Number (MPN): 509648

Consumer Alert

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones

NOTE: None of the wireless systems we carry are capable of violating the FCC guidelines stated above. We are presenting this information as a matter of legally required disclosure.