NUX Masamune 2-in-1 Compressor and Boost Pedal

No longer available at zZounds
Sharp and effective, the NUX Masamune combines compression and boost in a single pedal, with surgical controls for clipping range and high frequencies.

Booster and compressor pedals are the gigging guitarist's secret weapon -- and the NUX Masamune contains both effects in one convenient metal housing, with selectable signal routing. The Boost Section comes with Boost Level, Drive, and Hi-Cut controls. The Compressor Section comes with Komp Level, Sustain, Blend, and Clip controls. The Masamune has an external foot-switch jack input, so you can easily operate the pedal by using an additional remote switch.

Booster

It forges your dry signal, enhancing your sound before sending your signal to your amp and/or any effects unit. The Booster adds beneficial color to your signal, and, if necessary, after you adjust the boost & drive levels, you can cut high frequencies on your Input signal with the Hi-Cut Toggle Switch.

Kompressor

Masamune's Kompressor does a remarkable job managing and enhancing your signal: Komp Level knob adjusts the final Output level for the Compressor, perfectly balancing your Input and Output signals. Sustain knob adjusts the compression ratio, and increases sustain. Higher sustain levels will squash your signal harder when you hit the strings and creates a longer, richer sustain. Blend knob adjusts the compressor transparency from 50% to 100%, so you can dial-in the exact amount of compressed dry-signal blend you want.

Clip Toggle allows you to choose the clipping range of your Input signal. The Toggle-UP position will squeeze the signal for voluminous sound, and Toggle-DOWN will open up more space read more on your clipping range.

Inside Routing

NUX Masamune Booster & Kompressor has inside routing with 3 Functions:
- Use both effects in parallel connection.
- Toggle-UP the MUTEX to engage only one effect at a time.

Features:

- Kompressor with 2 clipping modes
- Komp Level
- Sustain
- Blend
- Booster with hi-cut toggle switch
- Drive
- Inside routing
- External Switch Output
read less

For support or warranty questions, please contact the manufacturer:
Phone: 626-800-7466
Email: usa@cherubtechnology.com
Web: https://www.nuxefx.com/support.html