Martin THRILL Multi FX LED Light
No longer available at zZounds
Great for mobile DJs, the THRILL Multi-FX LED gives you 3 effects in one fixture: red and green lasers, colorful spinning multi-beams, and intense strobes.
Overview
Martin THRILL Multi-FX LED is a 3-in-1 LED light fixture with an impressive number of tricks up its sleeve, guaranteed to make your show larger than life. It is equipped with laser, strobe, and rotating colored multibeams with super bright output for a great variety of dazzling looks and mid-air effects.
With its high-speed, ultra-sharp laser beams, the THRILL Multi-FX LED is ideal for creating dramatic atmospheres and boosting energy levels in a variety of setups ranging from entertainment and club environments to wedding parties and corporate shows.
THRILL Multi-FX LED is a perfect fit for musicians, DJs and home enthusiasts who want to spend their time focused on entertaining, rather than setting up and controlling complex equipment. For a literal plug and play experience, THRILL Multi-FX LED features a built-in microphone—simply turn on the sound trigger and let the beat of your music THRILL your audience. In addition, the fixture has eight, professionally-programmed shows that can be run either standalone or with daisy-chained units—no lighting experience required.
- Easy plug-and-play control
- Portable and lightweight
With its high-speed, ultra-sharp laser beams, the THRILL Multi-FX LED is ideal for creating dramatic atmospheres and boosting energy levels in a variety of setups ranging from entertainment and club environments to wedding parties and corporate shows.
THRILL Multi-FX LED is a perfect fit for musicians, DJs and home enthusiasts who want to spend their time focused on entertaining, rather than setting up and controlling complex equipment. For a literal plug and play experience, THRILL Multi-FX LED features a built-in microphone—simply turn on the sound trigger and let the beat of your music THRILL your audience. In addition, the fixture has eight, professionally-programmed shows that can be run either standalone or with daisy-chained units—no lighting experience required.
Features:
- High-speed hybrid effect light fixture that energizes crowds with multibeams, laser and strobe – effects- Easy plug-and-play control
- Portable and lightweight
Specs
- Physical
- Length: 249 mm (9.8 in.)
- Width: 229 mm (9.0 in.)
- Height: 249 mm (9.8 in.)
- Height with hanging bracket: 288 mm (11.3 in.)
- Weight: 4.0 kg (8.9 lbs.)
- Dynamic Effects
- Multibeam effects
- Color mixing: RGBWA
- Color selection: 36 color presets
- Electronic dimming: 0-100%
- Strobe rate: 0-22 Hz
- Strobe and pulse effects: Variable speed and action, random strobe
- Electronic 'shutter' effect: Instant open and blackout
- Strobe effects
- Color: White
- Strobe rate: Fixed, 15 Hz
- Special effects: On/off, strobe effect, pulse effects, random and blackout
- Laser effects
- Color: Red, green
- Special effects: On/off, strobe effect, pulse effects, random and blackout
- Control and Programming
- Control options: DMX, stand-alone
- Safety switch, laser: Keyed switch on/off operation
- DMX channels: 2/16
- Stand-alone trigger options: Sound-trigger, auto-run
- User interface: Control panel with LED display
- DMX compliance: ANSI E1.11 - USITT DMX512-A
- Optics
- Multibeam and strobe
- Multibeam light source: 5 x 3 W RGBWA LEDs
- Strobe light source: 8 x 1 W White LEDs
- Minimum LED lifetime: 30 000 hours (to >70% luminous output)
- Laser
- Green laser, power / wavelength: 50 mW / 532 nm
- Red laser, power / wavelength: 150 mW / 650 nm
- Aperture diameter: 7 mm
- Beam shape: Divergent
- Pulse duration (frequency): Not pulsed
- Maximum single-beam laser power from aperature: 7.5 mW
- Class: 3B (US: Class IIIB)
- Minimum laser lifetime: 3 000 hours
- Construction
- Housing: Steel
- Color: Black
- Ingress protection: IP20
- Installation
- Mounting: Adjustable bracket, surface or truss mount
- Mounting points: Bracket for single rigging clamp, M12
- Orientation: Any (respecting laser precautions)
- Location: Indoor, dry locations only, overhead use only
- Minimum distance above floor level: 3 m (9.8 ft.)
- Minimum distance from public: 3 m (9.8 ft.)
- Connections
- AC power in/thru: IEC male inlet/female connector, C14/C13
- DMX data in/thru: 3-pin XLR
- Electrical
- AC power: 100-240 V nominal, 50/60 Hz
- Fuse: F 3 AL, 250 V
- Typical power consumption: 35 W
- Maximum number of fixtures on AC power throughput, 100-130 V: 6 x THRILL Multi-FX LED or 3 A
- Maximum number of fixtures on AC power throughput, 220-240 V: 10 x THRILL Multi-FX LED or 3 A
- Power consumption figures are typical, not maximum: Allow for +/-10% variation.
- Typical Power and Current
- 110 V, 60 Hz: 0.5 A, 35 W
- 230 V, 50 Hz: 0.3 A, 35 W
- Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
- Thermal
- Cooling: Passive
- Maximum ambient temperature (Ta max.): 40 degrees C (104 degrees F)
- Minimum ambient temperature (Ta min.): 0 degrees C (32 degrees F)
- Total heat dissipation: (calculated, +/- 10%) at full intensity, full white: 225 BTU/hr.
- Length: 249 mm (9.8 in.)
- Width: 229 mm (9.0 in.)
- Height: 249 mm (9.8 in.)
- Height with hanging bracket: 288 mm (11.3 in.)
- Weight: 4.0 kg (8.9 lbs.)
- Dynamic Effects
- Multibeam effects
- Color mixing: RGBWA
- Color selection: 36 color presets
- Electronic dimming: 0-100%
- Strobe rate: 0-22 Hz
- Strobe and pulse effects: Variable speed and action, random strobe
- Electronic 'shutter' effect: Instant open and blackout
- Strobe effects
- Color: White
- Strobe rate: Fixed, 15 Hz
- Special effects: On/off, strobe effect, pulse effects, random and blackout
- Laser effects
- Color: Red, green
- Special effects: On/off, strobe effect, pulse effects, random and blackout
- Control and Programming
- Control options: DMX, stand-alone
- Safety switch, laser: Keyed switch on/off operation
- DMX channels: 2/16
- Stand-alone trigger options: Sound-trigger, auto-run
- User interface: Control panel with LED display
- DMX compliance: ANSI E1.11 - USITT DMX512-A
- Optics
- Multibeam and strobe
- Multibeam light source: 5 x 3 W RGBWA LEDs
- Strobe light source: 8 x 1 W White LEDs
- Minimum LED lifetime: 30 000 hours (to >70% luminous output)
- Laser
- Green laser, power / wavelength: 50 mW / 532 nm
- Red laser, power / wavelength: 150 mW / 650 nm
- Aperture diameter: 7 mm
- Beam shape: Divergent
- Pulse duration (frequency): Not pulsed
- Maximum single-beam laser power from aperature: 7.5 mW
- Class: 3B (US: Class IIIB)
- Minimum laser lifetime: 3 000 hours
- Construction
- Housing: Steel
- Color: Black
- Ingress protection: IP20
- Installation
- Mounting: Adjustable bracket, surface or truss mount
- Mounting points: Bracket for single rigging clamp, M12
- Orientation: Any (respecting laser precautions)
- Location: Indoor, dry locations only, overhead use only
- Minimum distance above floor level: 3 m (9.8 ft.)
- Minimum distance from public: 3 m (9.8 ft.)
- Connections
- AC power in/thru: IEC male inlet/female connector, C14/C13
- DMX data in/thru: 3-pin XLR
- Electrical
- AC power: 100-240 V nominal, 50/60 Hz
- Fuse: F 3 AL, 250 V
- Typical power consumption: 35 W
- Maximum number of fixtures on AC power throughput, 100-130 V: 6 x THRILL Multi-FX LED or 3 A
- Maximum number of fixtures on AC power throughput, 220-240 V: 10 x THRILL Multi-FX LED or 3 A
- Power consumption figures are typical, not maximum: Allow for +/-10% variation.
- Typical Power and Current
- 110 V, 60 Hz: 0.5 A, 35 W
- 230 V, 50 Hz: 0.3 A, 35 W
- Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
- Thermal
- Cooling: Passive
- Maximum ambient temperature (Ta max.): 40 degrees C (104 degrees F)
- Minimum ambient temperature (Ta min.): 0 degrees C (32 degrees F)
- Total heat dissipation: (calculated, +/- 10%) at full intensity, full white: 225 BTU/hr.
No longer available at zZounds
In most cases, a product is unavailable because it has been discontinued by the manufacturer
This is a carousel with product cards. Use the previous and next buttons to navigate.
People who bought this item also bought
QSC KW153 3-Way Powered Loudspeaker (1000 Watts, 1x15")
$1,899.99
- 18 x$105.55
- 12 x$158.33
- 8 x$237.50
Odyssey DJBOOTHM65 Media DJ Booth with TV Mount
$579.95
- 8 x$72.49
- No Credit Check6 x$96.66
- No Credit Check4 x$144.99
Chauvet DJ Helicopter Q6 Effect Light
$379.99
- 8 x$47.50
- No Credit Check6 x$63.33
- No Credit Check4 x$95.00
Mackie Thump212 Powered Speaker (1x12", 1400 Watts)
$339.99
- 8 x$42.50
- No Credit Check6 x$56.66
- No Credit Check4 x$85.00
JMAZ Galaxy Tube LED Effect Light 6-Pack
$479.95
- 8 x$59.99
- No Credit Check6 x$79.99
- No Credit Check4 x$119.99
Alto Professional TS15S Powered Subwoofer
$599.00
- 12 x$49.92
- 8 x$74.88
- No Credit Check6 x$99.83
- No Credit Check4 x$149.75