Galaxy Audio EDXR/38VV Dual-Channel Lavalier Microphone Wireless System

No longer available at zZounds

Get two lavalier mics, two body pack transmitters, and a receiver with the Galaxy Audio EDXR/38VV wireless system. Includes 1/4" cable and power supply.

Overview

Part of Galaxy Audio's EDX Series, the EDXR/38VV is a professional dual-channel UHF wireless microphone system. The EDXR (EDX Receiver) features 2 internal antennas (1 for each receiver channel), 16 selectable channels on each receiver, and IR Sync from receiver to transmitter. The EDX has 2 discrete male XLR outputs and 1 combined 1/4" output on the back of the unit. The output is controlled by a volume control for each receiver, located on the front of the unit.

This system includes the EDXR Receiver, 2 MBP38 Body Pack Transmitters, 2 LV13-UBK Lavalier Microphones, 1/4" to 1/4" cable, and Power Supply.

The EDXR can be used and will sync with either the HH38 handheld or the MBP38 body pack transmitters. Both transmitters feature an on/off switch and are powered by two "AA" batteries. The MBP38 body pack transmitter also features a Mic/0/-10 selector switch for various input level sources.

Features:

- 200' Range
- 16 Selectable UHF Frequencies
- Internal Antennas
- Dual Channel Receiver
- AF & RF Indicators
- IR Sync Receiver to Transmitters
- 1 Mixed 1/4" Output, 2 Balanced Male XLR Outputs
- 2 Internal Antennas (Non-Diversity)
- Rugged Plastic Casing

Specs

Available Channels: 16
Frequency Range:
CODE D 584-607 MHz
CODE N 518-542 MHz
Transmitter Output Level: 10 mW
Band: UHF
Operating Range Under Typical Conditions 200': (61 m), actual range depends on RF signal absorption, reflection, and interference.
Audio Frequency Response: (+/-3 dB) 60 Hz ~ 16 kHz
Total Harmonic Distortion: (+/-30 kHz deviation 1 kHz tone): <1%
Dynamic Range: >90 dB A-weighted
Operating Temperature Range: 14 degrees F to 122 degrees F, battery characteristics may limit this range.

EDXR RECEIVER

Audio Output Level XLR Connector (into 600 Ohms load): -12 dBV
1/4" Connector (into 3 k Ohms load): -18 dBV
Output Impedance: XLR Connector 200 Ohms
1/4" Connector: 1 k Ohms
Sensitivity: -92 dBm
Image Rejection: >92 dB
Dimensions: 1.7" x 8.3" x 5" (42 x 210 x 127 mm) (HxWxD)
Weight: 13.6 oz (390 g)
Power Requirements: 12-18 V dc at 300mA, supplied by external power supply