Empress Compressor MK2 Pedal
zZounds Gear Experts Say...
Studio-grade compression, reimagined and simplified! Empress's Compressor MK2 adds variable HPF sidechain, blend, metering, and improved low-end response.
Overview
When Empress released their original Compressor back in 2011, it quickly became a favorite among guitar and bass players alike who were searching for something more than the typical oversimplified controls found on most compressor pedals. Now, based on their users' valuable feedback, they've taken everything great about the original Compressor and made it even better.
On top of the full range of features and controls normally only seen in high end studio equipment, such as input and gain reduction metering, independent attack and release controls, a mix knob for parallel compression, and an external sidechain insert, they've now added a 'tilt' tone eq control, and a selectable sidechain high pass filter built into the Compressor's detection circuit. Oh, and the whole package is now half the size and available in two snazzy colors!
- Extremely Transparent - Add dynamic control without altering the original tone of your instrument
- 3 Compression Ratios - 2:1, 4:1 and 10:1 ratios offer lots of flexibility
- Attack and Release Control - allows for ultimate control over the compression characteristics
- Mix - Blend uncompressed signal in with the compressed signal for parallel compression, New York Style!
- Metering - Meter both gain reduction and input levels on separate meters.
- Tone - New tone knob, a "tilt" sytle tone knob centered at 500Hz to nail that perfect tone.
- Sidechain Send/Return- 3.5mm TRS jack send… read more and return for sidechain compression.
- Sidechain High Pass Filter - No need to add a high pass filter to the sidechain, now there is one built in that can be toggled off or set to 120 or 240Hz.
- True Display LEDs - Bright multi-color LEDs always let you know what the compressor is doing.
- Power On Bypassed or Engaged - For musicians that never want to turn their compressor off.
- True Bypass - The Empress Compressor employs true bypass, so you can be sure that it's not affecting the signal when disengaged.
- Small Size - New enclosure approximately half the size of the original compressor, which is delightfully small when considering all the features packed into this unit.
- Beautiful Case - It has a sparkle you can't deny, in blue or silver!
read less
On top of the full range of features and controls normally only seen in high end studio equipment, such as input and gain reduction metering, independent attack and release controls, a mix knob for parallel compression, and an external sidechain insert, they've now added a 'tilt' tone eq control, and a selectable sidechain high pass filter built into the Compressor's detection circuit. Oh, and the whole package is now half the size and available in two snazzy colors!
Features:
- All Analog Signal Path - no digitals in here!- Extremely Transparent - Add dynamic control without altering the original tone of your instrument
- 3 Compression Ratios - 2:1, 4:1 and 10:1 ratios offer lots of flexibility
- Attack and Release Control - allows for ultimate control over the compression characteristics
- Mix - Blend uncompressed signal in with the compressed signal for parallel compression, New York Style!
- Metering - Meter both gain reduction and input levels on separate meters.
- Tone - New tone knob, a "tilt" sytle tone knob centered at 500Hz to nail that perfect tone.
- Sidechain Send/Return- 3.5mm TRS jack send… read more and return for sidechain compression.
- Sidechain High Pass Filter - No need to add a high pass filter to the sidechain, now there is one built in that can be toggled off or set to 120 or 240Hz.
- True Display LEDs - Bright multi-color LEDs always let you know what the compressor is doing.
- Power On Bypassed or Engaged - For musicians that never want to turn their compressor off.
- True Bypass - The Empress Compressor employs true bypass, so you can be sure that it's not affecting the signal when disengaged.
- Small Size - New enclosure approximately half the size of the original compressor, which is delightfully small when considering all the features packed into this unit.
- Beautiful Case - It has a sparkle you can't deny, in blue or silver!
Specs
- Input Impedance: 1M
- Output Impedance: 2.2k
- Frequency Response (-3dB): 20Hz - 20kHz
- Distortion: less than 0.1%
- Noise: -101dB
- Power Input Voltage: 9V DC (Negative tip)
- Power Input Connector: 2.1mm barrel connector (Negative tip)
- Power Consumption: ~ 100mA
- Enclosure Material: Die Cast Aluminum
- Input connector: 1/4" Jack
- Output connector: 1/4" Jack
- Height (Enclosure only): 1.5"
- Height (including controls): 2.5"
- Length: 4.8"
- Width: 2.6"
- Weight: 1lbs
- Output Impedance: 2.2k
- Frequency Response (-3dB): 20Hz - 20kHz
- Distortion: less than 0.1%
- Noise: -101dB
- Power Input Voltage: 9V DC (Negative tip)
- Power Input Connector: 2.1mm barrel connector (Negative tip)
- Power Consumption: ~ 100mA
- Enclosure Material: Die Cast Aluminum
- Input connector: 1/4" Jack
- Output connector: 1/4" Jack
- Height (Enclosure only): 1.5"
- Height (including controls): 2.5"
- Length: 4.8"
- Width: 2.6"
- Weight: 1lbs
Dimensions and Weight in Packaging
Blue
- Shipping Weight: 0.71 lbs
- Shipping Dimensions: 7 x 4 x 3 in
- Manufacturer Part Number (MPN): CP2B
Silver
- Shipping Weight: 0.73 lbs
- Shipping Dimensions: 5 x 4 x 3 in
- Manufacturer Part Number (MPN): CP2S
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 888-676-1853
Email: support@empresseffects.com
Web: https://empresseffects.com/pages/product-support
Phone: 888-676-1853
Email: support@empresseffects.com
Web: https://empresseffects.com/pages/product-support
Blue
$274.00
FREE
-Day
Shipping!
Get it
for
Get it
(or get it
with an order of
),
if you order within
Shipping to
This is a carousel with product cards. Use the previous and next buttons to navigate.