RF Venue COMBINE4 + CP Beam Antenna Bundle for Wireless IEM Systems

Max out your venue's IEM capabilities with this massive RF Venue bundle, allowing you to combine four transmitters into one helical antenna to rule them all.

Overview

This RF Venue bundle includes one COMBINE4 IEM transmitter antenna combiner, one CP Beam antenna, and one RG8X25 25-foot low-loss coaxial cable.

This is a complete system, engineered to work together to combine up to four IEM transmitters of any brand into a single helical antenna. The CP Beam helical antenna steps up an IEM system's transmitting power by nearly eight times, focusing the signal directly on your performers and not scattering the signal where it isn't needed. This allows you to use the lowest possible setting of your transmitter's output power, which greatly reduces intermodulation interference to both your wireless mics and your IEMs. An extra benefit that improves RF signal and audio quality!

COMBINE4 IEM Transmitter Antenna Combiner Features:

- Broadband UHF operation (470-960 MHz range)
- Combines the signals of up to four wireless in-ear monitor transmitters into one antenna
- Four BNC inputs for IEM transmitter signals
- Front-panel LED signal indicators for each input
- Four DC output jacks that supply power to connected IEM transmitters
- Includes one AC cable, four DC cables, and four BNC jumpers
- Full rack width (1 RU)

CP Beam Antenna Features:

- Lightweight, circularly polarized beam antenna (470-698 MHz)
- Unique folding design allows antenna to be collapsed for storage and transport
- Can be used with IEMs, wireless microphone systems, and other UHF communication devices
63 x 70 degree beam angle
- Provides up to 9 dB of antenna… read more gain

RG8X25 25-Foot Coaxial Cable Features:

- Premium low-loss RG8X coaxial cable with BNC (male) connectors
- Double-shielded (braid over foil) design
- 25' (7.6 m)

Specs

Dimensions and Weight in Packaging
Base Item: Shipping Weight: 12.5 lbs; Shipping Dimensions: 22 x 14 x 9 in; Manufacturer Part Number (MPN): COMB4CPB

Consumer Alert

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones

NOTE: None of the wireless systems we carry are capable of violating the FCC guidelines stated above. We are presenting this information as a matter of legally required disclosure.

Documents and Manuals

For support or warranty questions, please contact the manufacturer:
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com
Web: https://www.audio-technica.com/en-us/support/category/product-support/