Audio-Technica BP899 Subminiature Omnidirectional Condenser Lavalier Microphone

Need a flexible, low-profile lavalier? Audio Technica has your set with the BP899, a robust condenser that does everything you want and stays out of the way.

The BP899 is a low-profile lavalier omnidirectional condenser with terminations for wired or wireless use. The microphone's wide dynamic range and tolerance for high sound pressure levels ensures intelligible, natural-sounding audio that's ideal for use by stage and television talent, lecturers, and worship leaders. Low-sensitivity models are also available for theater use. The diaphragm opening is covered by an acoustically transparent, moisture-repellent protective mesh that delivers maximum frequency response and lasting performance.

An included resonance cap can be applied to the microphone to provide even greater intelligibility, and it is designed to direct sweat and other moisture away from the microphone. The two included windscreens each feature a clasp that secures the windscreen to the mic and prevents it from accidently falling off, which can be critical during active use of the microphone for performances or sports. If up-close, directional miking is needed, the BP898 with cardioid capsule is recommended.

The mic's cable is made of a robust urethane elastomer that provides ultimate flexibility and strength, while resisting abrasion and moisture. The mic comes with a clothing clip that features two strain-relief points that isolate the mic from mechanical noise transferred over the cable.

BP899c - 55" (1.4 m) permanently attached cable (unterminated); no power module; in "theater" color (beige).

Features:

- Maximum intelligibility and clean, accurate read more reproduction for vocalists, lecturers, stage and television talent, and worship leaders
- Low-profile design (a mere 5.3 mm in diameter) is ideal for applications requiring minimum visibility
- Urethane elastomer cable with a double-spiral shield wire provides ultimate flexibility, strength, and resistance to abrasion and moisture
- Open-diaphragm design with protective mesh that repels sweat and other moisture for maximum frequency response and lasting performance
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.
read less

- Element: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern: Omnidirectional
- Frequency Response: 20-20,000 Hz
- Low Cut: 80 Hz, 18 dB/octave
- Open Circuit Sensitivity: -42 dB (7.9 mV) (0 dB=1 V/Pa, 1 kHz)
- Impedance: 250 ohms
- Maximum Input Sound Level: 140 dB SPL (1 kHz at 1% THD)
- Noise: 28 dB SPL (A-weighted)
- Dynamic Range: 112 dB (1 kHz at Max SPL)
- Signal-To-Noise Ratio: 66 dB (1 kHz at 1 Pa, A-weighted)
- Phantom Power Requirements: 11V-52V DC, 2 mA
- Switches: Low cut: on/off
- Weight: 1.2 g (0.04 oz) (Microphone body)
- Dimensions: 17.5 mm (0.69") long, 5.3 mm (0.21") diameter (Microphone body)
- Cable: 1.4 m (4.6')
- Output Connector: Unterminated
- Accessories Included:
- Clothing clip base (AT8461a, AT8461a-TH)
- Windscreens (AT8151a, AT8151a-TH)
- Resonance caps (AT8150a, AT8150a-TH)
- Case
Dimensions and Weight in Packaging
Beige, Unterminated
Shipping Weight: 0.4 lbs
Shipping Dimensions: 6 x 4 x 2 in
Manufacturer Part Number (MPN): AUD BP899CTH
Beige, Unterminated, Low Sensitivity
Shipping Weight: 0.4 lbs
Shipping Dimensions: 6 x 4 x 2 in
Manufacturer Part Number (MPN): AUD BP899LCTH
Black, Unterminated
Shipping Weight: 0.39 lbs
Shipping Dimensions: 6 x 4 x 2 in
Manufacturer Part Number (MPN): BP899c
Black, Unterminated, Low Sensitivity
Shipping Weight: 0.4 lbs
Shipping Dimensions: 6 x 4 x 2 in
Manufacturer Part Number (MPN): BP899Lc
Beige, for Wireless - cW
Shipping Weight: 0.42 lbs
Shipping Dimensions: 6 x 4 x 2 in
Manufacturer Part Number (MPN): AUD BP899CWTH
Beige, for Wireless - cW, Low Sensitivity
Shipping Weight: 0.42 lbs
Shipping Dimensions: 6 x 4 x 2 in
Manufacturer Part Number (MPN): AUD BP899LWTH
Black, for Wireless - cW
Shipping Weight: 0.5 lbs
Shipping Dimensions: 6 x 4 x 2 in
Manufacturer Part Number (MPN): BP899cW
Black, for Wireless - cW, Low Sensitivity
Shipping Weight: 0.42 lbs
Shipping Dimensions: 6 x 4 x 2 in
Manufacturer Part Number (MPN): BP899LcW
Beige, for Wireless - cH
Shipping Weight: 0.44 lbs
Shipping Dimensions: 6 x 4 x 2 in
Manufacturer Part Number (MPN): AUD BP899CHTH
Beige, for Wireless - cH, Low Sensitivity
Shipping Weight: 0.42 lbs
Shipping Dimensions: 6 x 4 x 2 in
Manufacturer Part Number (MPN): AUD BP899LCHTH
Beige, for Wireless - TA4F
Shipping Weight: 0.41 lbs
Shipping Dimensions: 6 x 4 x 2 in
Manufacturer Part Number (MPN): AUD BP899CT4TH
Beige, for Wireless - TA4F, Low Sensitivity
Shipping Weight: 0.41 lbs
Shipping Dimensions: 6 x 4 x 2 in
Manufacturer Part Number (MPN): BP899LcT4-TH
Black, for Wireless - cH
Shipping Weight: 0.5 lbs
Shipping Dimensions: 6 x 4 x 2 in
Manufacturer Part Number (MPN): BP899cH
Black, for Wireless - cH, Low Sensitivity
Shipping Weight: 0.36 lbs
Shipping Dimensions: 6 x 4 x 2 in
Manufacturer Part Number (MPN): BP899LcH
Black, for Wireless - TA4F
Shipping Weight: 0.41 lbs
Shipping Dimensions: 6 x 4 x 2 in
Manufacturer Part Number (MPN): AUD BP899CT4
Black, for Wireless - TA4F, Low Sensitivity
Shipping Weight: 0.41 lbs
Shipping Dimensions: 6 x 4 x 2 in
Manufacturer Part Number (MPN): BP899LcT4
Black, Wired - XLR Battery Power Module
Shipping Weight: 0.61 lbs
Shipping Dimensions: 6 x 4 x 2 in
Manufacturer Part Number (MPN): BP899

For support or warranty questions, please contact the manufacturer:
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com

Black, Wired - XLR Battery Power Module

$289.00
FREE -Day Shipping!
Get it  for
Get it by if you order within
Shipping to