Our recommended alternative

Audio-Technica AT-LPW40WN Wood Base Belt-Drive Turntable

More than just a pretty base, this turntable features a speed-sensor motor, AT-VM95E Dual Moving Magnet phono cartridge and built-in switchable phono preamp.

Audio-Technica AT-LPW40WN Wood Base Belt-Drive Turntable

$379.00
  • 8 x  
    $47.38
  • No Credit Check
    6 x  
    $63.17
  • No Credit Check
    4 x  
    $94.75
FREE Shipping

Audio-Technica AT-LPW30TK Belt-Drive Turntable

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
Audio-Technica AT-LPW30TK Belt-Drive Turntable, Action Position Back
Audio-Technica AT-LPW30TK Belt-Drive Turntable, Action Position Back
Audio-Technica AT-LPW30TK Belt-Drive Turntable, Action Position Back
Audio-Technica AT-LPW30TK Belt-Drive Turntable, Action Position Back Audio-Technica AT-LPW30TK Belt-Drive Turntable, Action Position Back Audio-Technica AT-LPW30TK Belt-Drive Turntable, Action Position Back
Hear vinyl how it was meant to sound. The Audio-Technica AT-LPW30TK turntable uses clean amplification and a low-resonance MDF plinth to deliver clear audio.

The Audio-Technica AT-LPW30TK is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. The two-speed (33-1/3 and 45 RPM) turntable features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with simulated teak veneer to limit low-frequency acoustical feedback.

The turntable includes a straight aluminum tonearm with adjustable tracking force and an AT-HS4 universal 1/2"-mount headshell with an AT-VM95C Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95C cartridge, which comes with a 0.6 mil conical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

Features:

- The AT-LPW30TK is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.
- Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
- Fully manual operation
- Adjustable dynamic anti-skate control
- Professional anti-resonance, die-cast aluminum platter with rubber mat
- AT-HS4 universal 1/2"-mount headshell and AT-VM95C Dual Moving Magnet phono cartridge with 0.6 mil conical stylus
- AT-VM95C cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of… read more options for every budget and application
- Straight tonearm with hydraulically damped lift control and lockable rest
- Anti-resonance MDF (medium density fiberboard) plinth with teak simulated wood veneer
- Built-in switchable phono pre-amplifier for phono or line-level output
- AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
- Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover read less

- Type: Belt-drive manual turntable
- Motor: DC servo
- Drive Method: Belt drive
- Speeds: 33-1/3 RPM, 45 RPM
- Turntable Platter: Die-cast aluminum
- Wow and Flutter: < 0.15% WRMS (33 RPM) at 3 kHz
- Signal-to-Noise Ratio: >60dB
- Output Level: Pre-amp "PHONO": 4 mV nominal at 1 kHz, 5 cm/sec
- Pre-amp "LINE": 200 mV nominal at 1 kHz, 5 cm/sec:
- Phono Pre-Amp Gain: 35 dB nominal, RIAA equalized
- Power Supply Requirements: 100-240V AC, 50/60 Hz, 0.5 A Max.
- Power Consumption: 110 V 60 Hz
- Working: 1.1 W:
- Motor off: 1.0 W:
- Power off: 0.1 W:
- Dimensions: 420.0 mm (16.53") W x 340.0 mm (13.38") D x 116.9 mm (4.6") H
- Weight: 3.90 kg (8.60 lbs.) without dust cover
- Accessories Included: Dust cover, Platter, Turntable mat, Drive belt, Counterweight, AT-HS4 headshell, AT-VM95C stereo cartridge, 45-RPM adapter, RCA audio cable (approx.. 1.0 m (3.3')), AC adapter (approx. 1.5 m (4.9')) (AD-SA1205WE), Dust cover hinges

- Tonearm type: Static balanced straight aluminum pipe tonearm
- Effective arm length: 223.6 mm
- Overhang: 18.6 mm
- Tracking error angle: <2 degrees
- Applicable cartridge weight: 12-17 g
- Stylus pressure adjustment range: 0-3 g
- AC adapter: 12 V, 0.5 A
- Replacement Stylus: AT-VMN95C

For support or warranty questions, please contact the manufacturer:
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com

Be the first to rate and review this product.

No longer available at zZounds