Audio-Technica AT-LPW30TK Belt-Drive Turntable

Hear vinyl how it was meant to sound. The Audio-Technica AT-LPW30TK turntable uses clean amplification and a low-resonance MDF plinth to deliver clear audio.
The Audio-Technica AT-LPW30TK is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. The two-speed (33-1/3 and 45 RPM) turntable features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with simulated teak veneer to limit low-frequency acoustical feedback.

The turntable includes a straight aluminum tonearm with adjustable tracking force and an AT-HS4 universal 1/2"-mount headshell with an AT-VM95C Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95C cartridge, which comes with a 0.6 mil conical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

Features

- The AT-LPW30TK is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.
- Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
- Fully manual operation
- Adjustable dynamic anti-skate control
- Professional anti-resonance, die-cast aluminum platter with rubber mat
- AT-HS4 universal 1/2"-mount headshell and AT-VM95C Dual Moving Magnet phono cartridge with 0.6 mil conical stylus
- AT-VM95C cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options read more for every budget and application
- Straight tonearm with hydraulically damped lift control and lockable rest
- Anti-resonance MDF (medium density fiberboard) plinth with teak simulated wood veneer
- Built-in switchable phono pre-amplifier for phono or line-level output
- AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
- Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.
read less
- Type: Belt-drive manual turntable
- Motor: DC servo
- Drive Method: Belt drive
- Speeds: 33-1/3 RPM, 45 RPM
- Turntable Platter: Die-cast aluminum
- Wow and Flutter: < 0.15% WRMS (33 RPM) at 3 kHz
- Signal-to-Noise Ratio: >60dB
- Output Level: Pre-amp "PHONO": 4 mV nominal at 1 kHz, 5 cm/sec
- Pre-amp "LINE": 200 mV nominal at 1 kHz, 5 cm/sec:
- Phono Pre-Amp Gain: 35 dB nominal, RIAA equalized
- Power Supply Requirements: 100-240V AC, 50/60 Hz, 0.5 A Max.
- Power Consumption: 110 V 60 Hz
- Working: 1.1 W:
- Motor off: 1.0 W:
- Power off: 0.1 W:
- Dimensions: 420.0 mm (16.53") W x 340.0 mm (13.38") D x 116.9 mm (4.6") H
- Weight: 3.90 kg (8.60 lbs.) without dust cover
- Accessories Included: Dust cover, Platter, Turntable mat, Drive belt, Counterweight, AT-HS4 headshell, AT-VM95C stereo cartridge, 45-RPM adapter, RCA audio cable (approx.. 1.0 m (3.3')), AC adapter (approx. 1.5 m (4.9')) (AD-SA1205WE), Dust cover hinges

- Tonearm type: Static balanced straight aluminum pipe tonearm
- Effective arm length: 223.6 mm
- Overhang: 18.6 mm
- Tracking error angle: <2 degrees
- Applicable cartridge weight: 12-17 g
- Stylus pressure adjustment range: 0-3 g
- AC adapter: 12 V, 0.5 A
- Replacement Stylus: AT-VMN95C
Dimensions and Weight in Packaging
Base Item
Shipping Weight: 13 lbs
Shipping Dimensions: 20 x 17 x 8 in
Manufacturer Part Number (MPN): AT-LPW30TK
If you have additional warranty questions, please contact the manufacturer at 330-686-2600

New

$249.00
On Backorder
Preorder Today
FREE -Day Shipping!
Get it  for
×
Get it by if you order within Faster Shipping
Shipping to