RF Venue 2x1Split Passive Splitter/Combiner

A versatile and handy tool, the RF Venue 2x1Split splitter/combiner can be used to run a distributed antenna system, add a spectrum analyzer, and more.

Use the 2x1Split passive splitter/combiner to make an 8-channel IEM combiner, create a distributed antenna system, or to tap into your spectrum analyzer to get more insight into your setup. One output can pass 12V DC antenna power if DC power over coax is provided.
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.

RF carrier frequency range: 10-1,000 MHz
VSMR (Voltage Wave Standing Ratio): 1.2
Impedance: 50 ohms
Isolation: 20 dB
Insertion loss: 2 dB
Dimensions: 72.2 mm (2.8") W x 23.6 mm (0.9") D x 54.9 mm (2.2") H
Weight: 62.6 g (16 oz)
Dimensions and Weight in Packaging
Base Item
Shipping Weight: 0.25 lbs
Shipping Dimensions: 3 x 3 x 3 in
Manufacturer Part Number (MPN): 2X1SPLIT

Consumer Alert

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones

NOTE: None of the wireless systems we carry are capable of violating the FCC guidelines stated above. We are presenting this information as a matter of legally required disclosure.

For support or warranty questions, please contact the manufacturer:
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com
Web: https://www.audio-technica.com/en-us/support/category/product-support/

New

$99.00
FREE -Day Shipping!
Get it  for
Get it by if you order within
Shipping to