AEA R84 Classic Big Ribbon Pressure Gradient Microphone

Prepare to be impressed by the realistic recordings this passive ribbon captures! Smooth, natural results on vocals, guitar, horns, and nearly any source.

The R84 and the R84A are pill-shaped, side-address, ribbon microphones with a bidirectional pickup pattern. They are assembled with the same Big Ribbon tuning (16.5 Hz) as the AEA/RCA R44 and share many of the unique sound characteristics with their historic predecessor. Designed to accommodate distant and medium miking duties, they exhibit a flat frequency response when placed 3 feet (1 meter) away from the source. As a result, the mic performs well on a variety of recording applications including vocals, brass, strings, woodwinds, guitars, and drums. R84 series microphones continue to gain followers with their natural sound, articulate midrange and forgiving nature. Whether used on vocals or instruments, their performance is intimate, warm and detailed, yet never harsh.

Phantom power is not required or recommended for the passive R84. With a correctly wired cable and a properly working phantom power supply, there is actually little danger of damaging an R84 microphone with phantom power. However, passive ribbons such as the R84 can be damaged if ground (Pin 1) is accidentally shorted, miswired, or hot patched in a patch bay to (Pin 2) or (Pin 3). Using phantom power with a faulty or miswired cable or a defective supply can severely stretch or break a ribbon. Since passive ribbon microphones and other transformer-coupled microphones can be particularly vulnerable to phantom-power, it is recommended to make disengaging phantom-power before plugging and unplugging the microphone read more a habit.

Features:

- Pill-shaped, side-address, ribbon microphone with a bidirectional pickup pattern
- Assembled with the same Big Ribbon tuning (16.5 Hz) as the AEA/RCA R44
- Shares many of the unique sound characteristics with its historic predecessor
- Designed to accommodate distant and medium miking duties
- Exhibits a flat frequency response when placed 3 feet (1 meter) away from the source
- Offers a natural sound, articulate midrange, and forgiving nature
- Performance is intimate, warm and detailed, yet never harsh
- Includes dust cover and case
read less

-Operating Principle: Pressure gradient transducer
-Directional Pattern: Bidirectional
-Frequency Range: <20 Hz to >20 kHz
-Polarity: Pin 2 high for positive pressure on front of microphone
-Polar Response: Native bidirectional, figure-of-8 pattern
-Horizontal Polar Response: Up to 90 dB rejection at right angles to the front/back axis.
-Vertical Polar Response: Level changes with angle of incidence, but frequency response is consistent.
-Transducer Material: Pure aluminum corrugated ribbon
- Transducer Thickness: 1.8 um
- Transducer Width: 0.185 in (4.7 mm)
- Transducer Length: 2.35 in (59.7 mm)
-Microphone Height: 11.6 in (29.5 cm)
-Microphone Width: 3.9 in (9.9 cm)
-Microphone Depth: 2.5 in (6.4 cm)
-Microphone Weight with cable: 3 lb (1.36 kg)
-Connector: XLR-3M
-Maximum SPL: 165 + dB SPL (1% third harmonic > 1 kHz)
-Sensitivity: 2.5 mV/Pa (-52 dBv/Pa) into unloaded circuit
-Output Impedance: 270 Ohm nominal
-Recommended Load Impedance: 1.2K Ohm or greater
-Phantom Power: Not required or recommended
- Included Accessories: Softcase, user manual, captive 10" (3 meter) output cable with XLR-3M connector
Dimensions and Weight in Packaging
Base Item
Shipping Weight: 2.65 lbs
Shipping Dimensions: 13 x 6 x 6 in
Manufacturer Part Number (MPN): AEA R84

For support or warranty questions, please contact the manufacturer:
Web: https://aearibbonmics.com/support/

New

$1,199.00
  • 12 x  
    $99.92
  • 8 x  
    $149.88
FREE -Day Shipping!
Get it  for
Get it by if you order within
Shipping to