Customer Kudos
"I am, and will continue to be a devoted customer, because what I see is you: a great provider of great gear, devoted to the customer!!! This day and age you don't get that! Thanks again for everything! Keep up the great work!!!"
Search Results
-
Audio-Technica CP8201 Lo-Z to Hi-Z Transformer
Need to convert XLR to 1/4-inch? Reduce noise, attach a long mic cable, and maintain high-frequency response with an Audio-Technica Lo-Z to Hi-Z transformer.
-
Hosa MIT-176 XLR Female to Female TS 1/4" Impedance Transformer
Need to plug an XLR microphone into a guitar amp's 1/4" input? Use this impedance transformer to connect lo-Z XLR microphone cables to hi-Z instrument jacks.
-
Pig Hog PA-LTX14 XLR Female to 1/4" Line Transformer
Easily mix XLR and 1/4" cables with this handy line transformer. This Pig Hog adapter transforms impedance with its durable XLR female and 1/4" male jacks.
-
RapcoHorizon CVPBLOX Variable Pad with Mute
Wish your microphone had a mute button or volume knob? Add one with the CVPBLOX. This in-line pad's variable pot can pull out to mute the outgoing signal.
-
Whirlwind Little IMP Low-to-High Impedance Matcher
Connect low-impedance XLR microphones to your mixer's high-impedance 1/4" TS inputs to with a Whirlwind Little Imp impedance-matching transformer.
-
Shure A95UF Transformer
Give yourself the freedom to use long microphone cables with the Shure A95UF Transformer, which connects any mic to high- or low-impedance inputs.
-
Shure A95U Transformer
Convert 1/4" TS to XLR with no noise or hum! Connect any high- or low-impedance mic to any high- or low-impedance input with the Shure A95U transformer.
-
Shure A15RF RF Filter XLR In/Out
Got a long XLR cable run picking up AM radio? Solve it with Shure's in-line RF filter. The A15RF passes phantom power, so it can be used with condenser mics.
-
Shure A15HP High-Pass Filter
Cut the rumble! When you don't want frequencies below 100 Hz muddying your signal, roll them off right at the source with this XLR in-line high-pass filter.
-
Shure A15AS Switchable In-Line Audio Attenuator
Prevent a high-output mic or hot line-level signal from overloading your mixer -- the Shure A15AS in-line attenuator reduces your signal by 15, 20, or 25 dB.
$61.00- No Credit Check4 x$15.25
-
Lauten Audio LA-120 10dB In-Line Pad/Attenuator, Pair
Use your LA-120 small-diaphragm condensers on loud sources like snare drums and cymbals with this in-line 10dB pad/attenuator pair from Lauten Audio.
$79.00- No Credit Check4 x$19.75
-
Hosa MIT-435 XLR Female Lo-Z to 1/4" TS Hi-Z Transformer
Match impedances with this Lo-Z to Hi-Z transformer adapter. This connector steps up a microphone's signal, so you can plug into a high-impedance 1/4" input.
-
Hosa MIT-156 Impedance Matcher Transformer, XLR-3F to 1/8" TRS
You can plug an XLR microphone into a 1/8" stereo audio input when you add this impedance-matching adapter. It's ideal for connecting XLR mics to camcorders.
-
Hosa MIT-129 Female TS 1/4" to XLR Male Impedance Transformer
No Hi-Z instrument jack? Use this impedance-matching transformer to plug a high-impedance 1/4" guitar or bass cord into your mixer's low-impedance XLR input.
-
Hosa ATT-448 Input Attenuator, XLR Female to XLR Male
With this 3-position switch on your dynamic microphone's XLR cable, it's easy for a louder singer/speaker to adjust their volume down by -20, -30 or -40 dB.
-
Whirlwind ISOXL Line Level Isolation Transformer
Provide a quick fix to individual line level signals with the ISOXL. Say goodbye to pesky ground loops and other annoyances like humming or signal noise.
$69.00- No Credit Check4 x$17.25
-
Whirlwind ISOPOD XLR to Unbalanced Mini TRS Converter
Get your PA system thumping with music from your MP3 player with the ISOPOD. Safely sum stereo music to a balanced mono signal for mixing console insertion.
$86.00- No Credit Check4 x$21.50