PreSonus R80 V2 Powered Studio Monitor

No longer available at zZounds
Reveal the details in your mixes! With ribbon tweeters for a wide horizontal sweet spot, the 2nd-gen R80 monitor adds EQ controls you can tune to your space.

Clarity is king -- and with the R80 V2s, you'll hear every single detail of your music, and no problematic trouble spots will escape your ear again! If you're mixing or mastering high-resolution audio, the R80 V2 will ensure that you hear every nuance, thanks to its custom 6.8-inch Air Motion Transformer (AMT) tweeter that responds to the subtlest waveforms and the highest frequencies.

You'll hear all of the air and space that has become synonymous with high-resolution audiophile sessions. The AMT design also allows the R80 V2 to handle 8 to 13 times the projection area of more traditional tweeter designs -- while its unique housing constrains this projection area strictly to the horizontal axis. The result is a very wide sweet spot with focused vertical dispersion -- minimizing reflections from your desk, floor, or ceiling.

The 8-inch, custom coated, woven composite LF driver produces a more dynamic output than conventional designs, thanks to the rigid cone's ability to maintain a more constant dispersion pattern across its frequency response range, resulting in transparent sound with reduced reflections. Bi-amped with 140W RMS of Class D power -- 75 W driving the woofer and 65 W driving the tweeter -- the R80 V2 ranks among the most powerful monitor speakers in its category.

A set of four acoustic tuning controls allow you to tailor the R80 V2's frequency response to compensate for the anomalies of nearly any mix environment -- so you can expect predictable, consistent read more performance in the event you use them in more than one place. read less

Inputs:
- 1- Balanced XLR
- 1- Balanced 1/4" TRS
- 1- Unbalanced RCA
Frequency Response: 40 Hz - 22 kHz
Crossover Frequency: 2.6 kHz
LF Amplifier Power: 75W Class AB
HF Amplifier Power: 65W Class AB
Peak SPL (@ 1 meter): 107 dB
LF Driver: 8" woven composite
HF Driver Type: AMT
Diaphragm: 6.8-inch2 (4,400 mm2)
Equiv. Diaphragm o: 3" (75 mm)
Input Impedance: 20 kO balanced, 10 kO unbalanced
SNR (typical, A-weighted): >100 dB
Volume Range: A-type taper
High-frequency Control: +/- 6dB shelf @ 10kHz
Mid-frequency Control: +/- 6dB @ 1kHz
Low Cut: Flat, 80Hz, or 100Hz
Acoustic Space: Flat, -2dB or -4dB
Protection:
- RF interference
- Output-current limiting
- Over-temperature
- Turn-on/off transient
- Subsonic filter
- External mains fuse
Input Power: 100-120V ~50/60 Hz or 220-240V ~50/60 Hz
Standby Power: < 0.5W
Cabinet: Vinyl-laminated, medium-density fiberboard
Width: 9.5" (241 mm)
Depth: 12" (309 mm)
Height: 15" (379 mm)
Weight: 19.8 lbs (9 kg)

For support or warranty questions, please contact the manufacturer:
Phone: 225-216-7887
Web: https://support.presonus.com

Reviewers gave this product an overall rating of 5 out of 5 stars. (1 ratings)
Submitted December 10, 2022 by a customer from gmail.com

"Amazing"

Overall: 5 out of 5 stars
(see rating details)
Verified Customer zZounds has verified that this reviewer made a purchase from us.
These things sound amazing!! So much detail in the upper, and the low punch is great. And zZounds got me them delivered to my doorsteps by the next day.. Amazing experience all together..
Did you find this review helpful?
Thanks for your opinion!

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer